Dear all, regarding the “software compatibility” the CN9130 base, is marked for Debian and Ubuntu. I’ve one CN9130base, already configured with Ubuntu, booting it from eMMC (after installing U-boot bin image into the eMMC and using the configured image file for the board) and managed with Cockpit. …

Hi, currently the CN9130 base, on my side, is running with the Ubuntu image provided by SolidRun. I think thank the base and pro differs in some aspects like the ethernet ports number and i/o. The SOM CN9130 is the core, around it, the peripheral connections to/from the SOM’s connectors. Not sur…

I was able to pull the DTS file for the pro edition from the ubuntu image. If you are willing to test images, I can try the same steps for a DTS file for the base. The generated images are 10MiB so I should be able to email? it.

Dear, should be a good idea to share the image and how to note on OpenWrt? This in order to have additional support Currently the CN9310Base is running well with Ubutntu and I’ve no much time to test other image. :face_with_spiral_eyes: Thank You

…in OpenWrt support forum/page. :wink:

CN9130 base OpenWrt

OCTEON CN9130

lblyth August 31, 2022, 1:49pm 2

I have a similar question, I have started a conversation on this thread, Booting OpenWrt on ClearFog CN9130-Pro . I assume the pro vs base won’t be too different in the openwrt enablement.

Topic		Replies	Views
How to boot pre-built debian images on cf-base. Missing cn9130-cf-base.dtb in boot/marvell OCTEON CN9130	2	67	January 22, 2025
Building image for CN9130 pro OCTEON CN9130	2	511	April 3, 2022
Booting OpenWrt on ClearFog CN9130-Pro OCTEON CN9130	22	1506	August 25, 2024
Build image for CN9130 pro Using BuildRoot OCTEON CN9130	2	410	February 8, 2022
Failed to boot OCTEON CN9130	4	1230	August 6, 2022

CN9130 base OpenWrt

Related topics