Here You go my console messages, CN9130 base:
BootROM - 2.03
Starting AP IOROM 1.02
Booting from eMMC 0
Found valid image at boot postion 0x000
lNOTICE: Starting binary extension
NOTICE: SVC: DEV ID: CN913x, FREQ Mode: 0x0
NOTICE: SVC: AVS work point changed from 0x2de to 0x2d8
w/o ecc; strap value=0
4GB capacity; strap value=0
mv_ddr: 14.0.0-g666afa1 (Jul 07 2022 - 19:32:54)
SSCG_EN
Synopsys DDR43 PHY Firmware version: A-2017.11
SNPS DDR: 1D training passed
SNPS DDR: 2D training passed
SNPS DDR: training completed
dma memcmp pass
mv_ddr: completed successfully
NOTICE: Cold boot
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE: BL1: Built : 19:32:54, Jul 7 2022
NOTICE: BL1: Booting BL2
NOTICE: BL2: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE: BL2: Built : 19:32:54, Jul 7 2022
NOTICE: SCP_BL2 contains 7 concatenated images
NOTICE: Skipping MG CP1 related image
NOTICE: Load image to CP0 MG
NOTICE: Loading MG image from address 0x403114c Size 0xe0f0 to MG at 0xf2100000
NOTICE: Skipping MSS CP3 related image
NOTICE: Skipping MSS CP2 related image
NOTICE: Skipping MSS CP1 related image
NOTICE: Load image to CP0 MSS AP0
NOTICE: Loading MSS image from addr. 0x4044930 Size 0x1cfc to MSS at 0xf2280000
NOTICE: Done
NOTICE: Load image to AP0 MSS
NOTICE: Loading MSS image from addr. 0x404662c Size 0x5400 to MSS at 0xf0580000
NOTICE: Done
NOTICE: BL1: Booting BL31
lNOTICE: BL31: v2.3(release):v2.3-864-gcb1856237 (Marvell-devel-18.12.0)
NOTICE: BL31: Built : 19:32:54, Jul 7 2022
U-Boot 2019.10-10.0.0-00018-g15bfc87307 (Jul 07 2022 - 19:32:53 +0000)
Model: SolidRun CN9130 based SOM ClearFog Base
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
SoC: cn9130-A1; AP807-B0; CP115-A0
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
Clock: CPU 2000 [MHz]
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
DDR 1200 [MHz]
ERROR: mrvl_sip_smc_handler: unhandled SMC (0x82000014)
FABRIC 1200 [MHz]
MSS 200 [MHz]
LLC Enabled (Exclusive Mode)
DRAM: 4 GiB
Running in RAM - U-Boot at: 0x7fef0000
Env at: 0x7ff9c1ef
Comphy chip #0:
Comphy-0: SATA1
Comphy-1: USB3_HOST0
Comphy-2: SFI0 10.3125 Gbps
Comphy-3: SGMII1 1.25 Gbps
Comphy-4: USB3_HOST1
Comphy-5: PEX2
UTMI PHY 0 initialized to USB Host0
UTMI PHY 1 initialized to USB Host1
PCIE-0: Link down
NAND: 0 MiB
MMC: sdhci@6e0000: 0, sdhci@780000: 1
Loading Environment from MMC… *** Warning - bad CRC, using default environment
get_fdtfile_from_tlv_eeprom: could not identify carrier, defaulting to Clearfog Pro!
Net:
Warning: mvpp2-0 (eth0) using random MAC address - 06:e0:ce:a8:e2:3c
eth0: mvpp2-0 [PRIME]
Warning: mvpp2-1 (eth1) using random MAC address - 5a:85:03:22:75:7a
, eth1: mvpp2-1
Warning: mvpp2-2 (eth2) using random MAC address - 5e:2c:2f:d4:df:a3
, eth2: mvpp2-2
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1…
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
239 bytes read in 11 ms (20.5 KiB/s)
1: primary kernel
Retrieving file: /boot/Image
30153216 bytes read in 2023 ms (14.2 MiB/s)
append: console=ttyS0,115200 root=PARTUUID=30303030-01 rw rootwait
Retrieving file: /boot/cn9130-cf-base.dtb
22934 bytes read in 17 ms (1.3 MiB/s)
Flattened Device Tree blob at 06f00000
Booting using the fdt blob at 0x6f00000
Loading Device Tree to 000000007f5ce000, end 000000007f5d6995 … OK
Starting kernel …
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 5.8.0-00006-g6da046907c97-dirty (alon@tr2) (aarch64-linux-gnu-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-2019.12) 2.28.2.20170706) #4 SMP PREEMPT Thu Jun 24 16:44:14 IDT 2021
[ 0.000000] Machine model: SolidRun CN9130 based SOM Clearfog Base
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000be000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x13f7e0100-0x13f7e1fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 23 pages/cpu s53912 r8192 d32104 u94208
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: EL2 vector hardening
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031680
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=30303030-01 rw rootwait
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 3983216K/4192256K available (14012K kernel code, 2182K rwdata, 7572K rodata, 5632K init, 483K bss, 176272K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32)
[ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32)
[ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32)
[ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255]
[ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32)
[ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287]
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4f0 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns
[ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns
[ 0.000206] Console: colour dummy device 80x25
[ 0.000244] Calibrating delay loop (skipped), value calculated using timer frequency… 50.00 BogoMIPS (lpj=100000)
[ 0.000248] pid_max: default: 32768 minimum: 301
[ 0.000279] LSM: Security Framework initializing
[ 0.000314] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000329] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.000921] rcu: Hierarchical SRCU implementation.
[ 0.001470] EFI services will not be available.
[ 0.001560] smp: Bringing up secondary CPUs …
[ 0.001965] Detected PIPT I-cache on CPU1
[ 0.001998] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.002419] Detected PIPT I-cache on CPU2
[ 0.002441] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
[ 0.002857] Detected PIPT I-cache on CPU3
[ 0.002873] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
[ 0.002905] smp: Brought up 1 node, 4 CPUs
[ 0.002913] SMP: Total of 4 processors activated.
[ 0.002916] CPU features: detected: 32-bit EL0 Support
[ 0.002919] CPU features: detected: CRC32 instructions
[ 0.002922] CPU features: detected: 32-bit EL1 Support
[ 0.011462] CPU: All CPU(s) started at EL2
[ 0.011478] alternatives: patching kernel code
[ 0.012213] devtmpfs: initialized
[ 0.013695] KASLR disabled due to lack of seed
[ 0.013891] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.013899] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.014215] pinctrl core: initialized pinctrl subsystem
[ 0.014591] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.014592] thermal_sys: Registered thermal governor ‘power_allocator’
[ 0.014851] DMI not present or invalid.
[ 0.015086] NET: Registered protocol family 16
[ 0.015307] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.015383] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.015460] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.015478] audit: initializing netlink subsys (disabled)
[ 0.015541] audit: type=2000 audit(0.012:1): state=initialized audit_enabled=0 res=1
[ 0.015925] cpuidle: using governor menu
[ 0.016009] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.016048] ASID allocator initialised with 65536 entries
[ 0.016460] Serial: AMBA PL011 UART driver
[ 0.028167] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.028172] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.028175] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.028177] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.028694] cryptd: max_cpu_qlen set to 1000
[ 0.029739] ACPI: Interpreter disabled.
[ 0.030535] ap0_sd_vccq: Bringing 3300000uV into 1800000-1800000uV
[ 0.030814] iommu: Default domain type: Translated
[ 0.030934] vgaarb: loaded
[ 0.031066] SCSI subsystem initialized
[ 0.031221] usbcore: registered new interface driver usbfs
[ 0.031238] usbcore: registered new interface driver hub
[ 0.031263] usbcore: registered new device driver usb
[ 0.031685] pps_core: LinuxPPS API ver. 1 registered
[ 0.031688] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.031694] PTP clock support registered
[ 0.031747] EDAC MC: Ver: 3.0.0
[ 0.032289] FPGA manager framework
[ 0.032321] Advanced Linux Sound Architecture Driver Initialized.
[ 0.032606] clocksource: Switched to clocksource arch_sys_counter
[ 0.032686] VFS: Disk quotas dquot_6.6.0
[ 0.032709] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.032779] pnp: PnP ACPI: disabled
[ 0.034892] NET: Registered protocol family 2
[ 0.035058] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.035083] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.035188] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[ 0.035393] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.035450] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.035492] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.035581] NET: Registered protocol family 1
[ 0.035762] RPC: Registered named UNIX socket transport module.
[ 0.035765] RPC: Registered udp transport module.
[ 0.035767] RPC: Registered tcp transport module.
[ 0.035769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.035775] PCI: CLS 0 bytes, default 64
[ 0.036045] hw perfevents: unable to count PMU IRQs
[ 0.036054] hw perfevents: /ap807/config-space@f0000000/pmu: failed to register PMU devices!
[ 0.036171] kvm [1]: IPA Size Limit: 44bits
[ 0.036506] kvm [1]: vgic interrupt IRQ1
[ 0.036569] kvm [1]: Hyp mode initialized successfully
[ 0.038171] Initialise system trusted keyrings
[ 0.038233] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[ 0.040268] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.040527] NFS: Registering the id_resolver key type
[ 0.040536] Key type id_resolver registered
[ 0.040539] Key type id_legacy registered
[ 0.040545] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 0.040621] 9p: Installing v9fs 9p2000 file system support
[ 0.059897] Key type asymmetric registered
[ 0.059900] Asymmetric key parser ‘x509’ registered
[ 0.059917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.059920] io scheduler mq-deadline registered
[ 0.059923] io scheduler kyber registered
[ 0.063458] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver
[ 0.063777] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver
[ 0.064795] gpio-59 (phy_reset): hogged as output/high
[ 0.066474] EINJ: ACPI disabled.
[ 0.069633] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver
[ 0.069882] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver
[ 0.070144] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver
[ 0.070403] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver
[ 0.070732] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver
[ 0.071005] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver
[ 0.074452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.075165] printk: console [ttyS0] disabled
[ 0.095497] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 8, base_baud = 12500000) is a 16550A
[ 1.063462] printk: console [ttyS0] enabled
[ 1.068194] SuperH (H)SCI(F) driver initialized
[ 1.073013] msm_serial: driver initialized
[ 1.080664] loop: module loaded
[ 1.084243] megasas: 07.714.04.00-rc1
[ 1.088270] ahci f2540000.sata: supply ahci not found, using dummy regulator
[ 1.095386] ahci f2540000.sata: supply phy not found, using dummy regulator
[ 1.102805] platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator
[ 1.111777] platform f2540000.sata:sata-port@1: supply target not found, using dummy regulator
[ 1.120509] ahci f2540000.sata: masking port_map 0x3 → 0x3
[ 1.126141] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.134706] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.143306] scsi host0: ahci
[ 1.146409] scsi host1: ahci
[ 1.149370] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 25
[ 1.157325] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 25
[ 1.166877] spi-nor spi2.0: s25fl064k (8192 Kbytes)
[ 1.172529] spi-nor spi2.1: unrecognized JEDEC id bytes: ff ff ff ff ff ff
[ 1.179451] spi-nor: probe of spi2.1 failed with error -2
[ 1.185893] libphy: Fixed MDIO Bus: probed
[ 1.190329] tun: Universal TUN/TAP device driver, 1.6
[ 1.195790] thunder_xcv, ver 1.0
[ 1.199051] thunder_bgx, ver 1.0
[ 1.202319] nicpf, ver 1.0
[ 1.205561] hclge is initializing
[ 1.208914] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.216170] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.221530] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.228609] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.234406] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.240264] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.246221] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.253212] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.258821] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.266687] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.272843] libphy: orion_mdio_bus: probed
[ 1.278145] mvpp2 f2000000.ethernet: using 8 per-cpu buffers
[ 1.289531] sky2: driver version 1.30
[ 1.293714] VFIO - User Level meta-driver version: 0.3
[ 1.299679] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.306246] ehci-pci: EHCI PCI platform driver
[ 1.310721] ehci-platform: EHCI generic platform driver
[ 1.316038] ehci-orion: EHCI orion driver
[ 1.320121] ehci-exynos: EHCI Exynos driver
[ 1.324369] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.330586] ohci-pci: OHCI PCI platform driver
[ 1.335063] ohci-platform: OHCI generic platform driver
[ 1.340372] ohci-exynos: OHCI Exynos driver
[ 1.344813] xhci-hcd f2500000.usb3: xHCI Host Controller
[ 1.350163] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1
[ 1.357739] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.367021] xhci-hcd f2500000.usb3: irq 26, io mem 0xf2500000
[ 1.373094] hub 1-0:1.0: USB hub found
[ 1.376874] hub 1-0:1.0: 1 port detected
[ 1.380919] xhci-hcd f2500000.usb3: xHCI Host Controller
[ 1.386260] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2
[ 1.393779] xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.400179] usb usb2: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 1.408473] hub 2-0:1.0: USB hub found
[ 1.412250] hub 2-0:1.0: 1 port detected
[ 1.416367] xhci-hcd f2510000.usb3: xHCI Host Controller
[ 1.421721] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3
[ 1.429290] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.438567] xhci-hcd f2510000.usb3: irq 27, io mem 0xf2510000
[ 1.444582] hub 3-0:1.0: USB hub found
[ 1.448359] hub 3-0:1.0: 1 port detected
[ 1.452388] xhci-hcd f2510000.usb3: xHCI Host Controller
[ 1.457732] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4
[ 1.465251] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.471651] usb usb4: We don’t know the algorithms for LPM for this host, disabling LPM.
[ 1.478784] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.479935] hub 4-0:1.0: USB hub found
[ 1.485223] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.488977] hub 4-0:1.0: 1 port detected
[ 1.498635] usbcore: registered new interface driver usb-storage
[ 1.504721] usbcore: registered new interface driver ftdi_sio
[ 1.510501] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.517892] usbcore: registered new interface driver option
[ 1.523495] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.531686] armada38x-rtc f2284000.rtc: registered as rtc0
[ 1.537215] armada38x-rtc f2284000.rtc: setting system clock to 2022-08-04T06:28:11 UTC (1659594491)
[ 1.546852] i2c /dev entries driver
[ 1.550943] pca953x 0-0020: supply vcc not found, using dummy regulator
[ 1.557625] pca953x 0-0020: using no AI
[ 1.562623] gpio-496 (pcie1.0-clkreq): hogged as input
[ 1.568823] gpio-499 (pcie1.0-w-disable): hogged as output/low
[ 1.574987] gpio-501 (usb3-current-limit): hogged as input
[ 1.581112] gpio-502 (usb3-power): hogged as output/high
[ 1.587899] gpio-507 (m.2 devslp): hogged as output/low
[ 1.593349] at24 0-0053: supply vcc not found, using dummy regulator
[ 1.600217] at24 0-0053: 256 byte 24c02 EEPROM, writable, 16 bytes/write
[ 1.608265] mcp3021 0-004c: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.634832] sbsa-gwdt f0610000.watchdog: Initialized with 10s timeout @ 25000000 Hz, action=0.
[ 1.644245] sdhci: Secure Digital Host Controller Interface driver
[ 1.650468] sdhci: Copyright(c) Pierre Ossman
[ 1.655064] Synopsys Designware Multimedia Card Interface Driver
[ 1.661604] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.698772] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit
[ 1.707035] xenon-sdhci f2780000.sdhci: Got CD GPIO
[ 1.742920] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit
[ 1.751287] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.758055] usbcore: registered new interface driver usbhid
[ 1.763672] usbhid: USB HID core driver
[ 1.769847] NET: Registered protocol family 17
[ 1.774388] 9pnet: Installing 9P2000 support
[ 1.778700] Key type dns_resolver registered
[ 1.783157] registered taskstats version 1
[ 1.787291] Loading compiled-in X.509 certificates
[ 1.793595] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.802500] armada8k-pcie f2640000.pcie: host bridge /cp0/pcie@f2640000 ranges:
[ 1.809885] armada8k-pcie f2640000.pcie: MEM 0x00e1000000…0x00e1efffff → 0x00e1000000
[ 1.818386] mmc0: new high speed MMC card at address 0001
[ 1.824084] mmcblk0: mmc0:0001 8GTF4R 7.28 GiB
[ 1.828760] mmcblk0boot0: mmc0:0001 8GTF4R partition 1 4.00 MiB
[ 1.834859] mmcblk0boot1: mmc0:0001 8GTF4R partition 2 4.00 MiB
[ 1.840887] mmcblk0rpmb: mmc0:0001 8GTF4R partition 3 512 KiB, chardev (234:0)
[ 1.848900] mmcblk0: p1
[ 2.834783] armada8k-pcie f2640000.pcie: Phy link never came up
[ 2.840737] armada8k-pcie f2640000.pcie: Link not up after reconfiguration
[ 2.847708] armada8k-pcie f2640000.pcie: PCI host bridge to bus 0000:00
[ 2.854356] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.859867] pci_bus 0000:00: root bus resource [mem 0xe1000000-0xe1efffff]
[ 2.866785] pci 0000:00:00.0: [11ab:0110] type 01 class 0x060400
[ 2.872833] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
[ 2.879171] pci 0000:00:00.0: supports D1 D2
[ 2.883461] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[ 2.890308] pci 0000:00:00.0: BAR 0: assigned [mem 0xe1000000-0xe10fffff]
[ 2.897133] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 3.260958] pcieport 0000:00:00.0: PME: Signaling with IRQ 36
[ 3.267322] libphy: SFP I2C Bus: probed
[ 3.272147] sfp sfp-eth@0: Host maximum power 2.0W
[ 3.279489] mvpp2 f2000000.ethernet: using 8 per-cpu buffers
[ 3.302953] mvpp2 f2000000.ethernet eth0: Using random mac address 8a:ba:1b:37:08:42
[ 3.313396] mvpp2 f2000000.ethernet eth1: Using random mac address ba:e6:63:18:68:7c
[ 3.322665] mvpp2 f2000000.ethernet eth2: Using random mac address 76:7b:8e:7b:bd:87
[ 3.340881] ALSA device list:
[ 3.343863] No soundcards found.
[ 3.445632] random: fast init done
[ 3.461990] EXT4-fs (mmcblk0p1): recovery complete
[ 3.467331] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.475473] ext4 filesystem being mounted at /root supports timestamps until 2038 (0x7fffffff)
[ 3.484141] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.490545] devtmpfs: mounted
[ 3.494787] Freeing unused kernel memory: 5632K
[ 3.499396] Run /sbin/init as init process
[ 3.824093] NET: Registered protocol family 10
[ 3.828998] Segment Routing with IPv6
[ 3.849453] systemd[1]: systemd 245.4-4ubuntu3.17 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 3.872303] systemd[1]: Detected architecture arm64.
Welcome to Ubuntu 20.04.4 LTS!
