I have not been able to find prebuilts for this, as they have been removed from images.solid-run.com
Can someone provide me with a prebuild? I have had zero success attempting to build one.
Semihalf has mainly provided the SystemReady ES firmware images for the McBin lineup. Their prebuilt firmware’s are available on their github, Home · Semihalf/edk2-platforms Wiki · GitHub
All their code is in mainline repositories, I will check what is wrong with building the current source.
Don’t get it mixed up, I didn’t go into detail in building the image because it was purely because it depends on old python and gcc-cross builds that arent offered on my distro. I ran into toolchain issues because it requires python 3.8 or older, GCC5 etc. These are no longer packaged with my distro and I didn’t wanna manually build it.
I’m trying the image suggested now.
When I booted into uboot using an SD card image I was given, I used loadx and sx to send the image over. When I set the jumpers to SPI, this happens:
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 02. error = 0x018
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 03. error = 0x018
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 04. error = 0x018