Issue Booting Yocto Image on NXP LX2160A ClearFog (SolidRun) Board

NXP LX2160
1

Hi,

We are planning to bring up a Yocto image on the NXP LX2160A ClearFog board from SolidRun.

We downloaded the default image from the SolidRun website and used the following image:

fsl-image-networking-full-lx2160a-rev2-clearfog-cx.rootfs.wic.gz

We flashed this image onto an SD card and attempted to boot the board. However, after inserting the SD card and powering on the board, we do not see any console logs.

Could you please let us know if we might be missing any steps or configuration?

Thanks in advance for your help.

Best regards,
M Suresh Kumar

2

Have you verified your boot dip-switches are set correctly. Have you booted the board before with another image?