Hello team, I tired to download the RT linux with the below modification for tag added Cloing https://source.codeaurora.org/external/qoriq/qoriq-components/linux release LSDK-21.08 Release LSDK-21.08 if [ "x$i" == "xlinux" ] && [ "x$RELEASE" == "xLSDK-21.08" ]; then …

That is correct. You need to check the tags available here. qoriq-components/linux - Linux Tree for QorIQ support

Thanks. also for for the board do we have specific switch setting to make the board reboot from remote power [ON OFF ]- incase there is board freeze or hang issue. regards, ranga

I don’t fully understand what you mean. Do you mean if the power supply is powered on and off you want to board to automatically power on?

auto power on can be enabled by populating header J39 next to the ATX power connector and jumpering it. This holds the ATX power on signal to ground so the power supply will always provide power to the board when it is powered on.

Thanks, could you provide which all pins has to shorted on J39 connetor… if any image or doc will be helpful

j39 is only a 2 pin header. You just populate it with a header and can then jumper it to force the PSU to always power on.

RT linux kernel download

NXP LX2160

Ranga April 20, 2022, 11:46am 5

yes correct in NXP 2160 ARDB board there is default switch setting to make the board to auto power on when power is made off and on.

Topic		Replies	Views
Bootup lx2160 NXP LX2160	39	1388	May 16, 2022
How to build the image with RT(realtime) patch? NXP LX2160 NXP-LX2160	6	921	July 21, 2021
Updating only kernel image on LX 2160 clearfog boards NXP LX2160	1	252	March 9, 2022
Patch can not work for linux-LSDK-20.04/ NXP LX2160	1	442	September 12, 2021
Board not booting to default image (Clearfog CX LX2) NXP LX2160	1	454	February 13, 2022

RT linux kernel download

Related topics