Hi there, I recently bought a HoneyComb LX2 board off eBay and I’m trying to get it to work.
The tested RAM modules listed on site are a bit difficult to source so I bought an Oloy brand DDR4 3200 CL18 1.2V 16GB x2 kit from Amazon.
As it turned out that, I couldn’t get the board to boot with the memory kit (tried different configs, e.g. 1 stick, 2 sticks, in different slots etc). And by not booting up, I meant there was nothing coming through the serial console: the board did power up, with LED1 on, CPU fan spins up to 100% then quiets down.
Since RAM modules and 20-pin power are the only 2 things required to be plugged in for the board to start, and the power appears to be working, my current conclusion is that the RAM modules are not compatible, so I wonder how particular is the board about RAM models?
Alternatively, another speculation could be that the board is simply defective (though the seller said that the board is open-box, but new never used), so I wonder if there are other ways to get more debugging output of the boot process to see where things might be broken?
Thanks!