I’m looking to have a 40Gbps and a 10Gbps port on the SolidRun LX2160A ClearFog CX. I found this reference manual <a href="https://developer.solid-run.com/knowledge-base/lx2160a-cex7-user-manual/?_gl=1*fm532x*_gcl_aw*R0NMLjE2NjM2MDcxMTYuRUFJYUlRb2JDaE1Ja0lYa3RxdWgtZ0lWM3hYVUFSMDFoUURfRUFBWUFTQUFFZ0w4RV9EX0J3RQ..&_ga=2.47443623.1223151252.1666814074-540084244.1663075607&_gac=1.237627828.1663607124.EAIaIQobChMIkIXktquh-gIV3xXUAR01hQD_EAAYASAAEgL8E_D_BwE#serdes-block-3-sd3-pllf-plls-100mhz-spread-spectrum-disabled" rel="noopener nofollow ugc">https://developer.solid-run.com/knowledge-base/lx2160a-cex7-user-manual/?_gl=1fm532x_gcl_aw*R0NMLjE2NjM2MDcxMTYuRUFJYUlRb2JDaE1Ja0lYa3RxdWgtZ0lWM3hYVUFSMDFoUURfRUFBWUFTQUFFZ0w4RV9EX0J3…

Actually, I did find a protocol where there can be a 40G port and a 10G port (SD1=19), but according to the block diagram, it exposes the 40G port to the 4 x SFP+ devices, and the 10G port coming out of the QSFP device. I’d prefer the 40G port coming out of the QSFP device and the 10G port coming o…

Yes our boards would require a custom pbl setup for this configuration. I am working on the documentation.

Thank you jnettlet. I look forward to your solution to build a board image with SD1=18 and a separate board image with SD1=19.

I am working on getting this documented, with a couple other configurations.

Hello, I am also looking to have a 40G port coming out of the QSFP device. I tried to generate an image with SD1=19 but the rcwi file for this configuration is not available. Can you confirm that the SD1=19 is the right configuration to have a 40G on QSFP port ? If it’s the right configuration: …

40Gbps and 10Gbps

NXP LX2160

lx2160a_newbie November 8, 2022, 2:18pm 5

@jnettlet Would you have an update on the files needed to generate a board image for SD1 = 18 and for SD1 = 19?

Topic		Replies	Views
Choosing the correct TARGET for runme.sh to build the image for ClearFog LX2160a	8	116	December 2, 2024
What is the "nominal" expected Clearfog SERDES configuration? NXP LX2160	1	409	November 3, 2022
SFP ethernet? NXP LX2160	6	607	July 23, 2022
SERDES configuration for Honeycomb LX2160A NXP LX2160	4	1195	September 25, 2021
Which ports are SFP28 and the others SFP+ on LX2162a NXP LX2160	7	128	July 22, 2024

40Gbps and 10Gbps

Related topics