Hello,
I have a Hummingboard 2 (Edge), with GPIO pin layout like 4 * 3 + 4 * 6.
I can’t seem to find a picture or something with the pin layout, the best thing i found was
This: https://solidrun.atlassian.net/wiki/spaces/developer/pages/287343206/HummingBoard+Edge+Gate+GPIOs
And this: Hummingboard Edge / Gate — wiringX 7.0 documentation
But I can’t seem to find an easy to view picture. Can someone help?
We just launched our new documentation site at https://dev.solid-run.com/ You can take a look there. Otherwise you can also use the simplified schematics for the board to help out. If you don’t find what you need just ping back here and I will answer your specific question.
1 Like
Hi, okay thank you!
I found some other mappings that were not likely accurate or i misread them, as with multimeter the 5v, 3,3v and gnd were found in somewhat different places :-).
The map found in your link seemed to match my testing at a first glance, so thanks.