Hi How I can enable dhclient and show up at least one NIC up automatically? systemctl enable dhclient.service doesn’t work and I have to do on every reboot ls-addni dpmac.16 or similar

which hardware platform and distribution are you using? To enable an interface automatically a MAC needs to be connected to a NIC in the dpl device-tree that is loaded into the mcbin firmware. Then Linux needs a device-tree entry to initialize the device and bind the dpaa2 driver to it.

I use Clearfog LX2162a with a prebuilt Image from SolidRun Ubuntu 20.04 LTS

git clone GitHub - SolidRun/mc-utils: Mirror of codeaurora qoriq mc-utils cd mc-utils/config/lx2160a/CEX/ vim dpl-eth.8x10g.19.dts adjusted content as follow connections { connection@1 { endpoint1 = "dpni@0"; endpoint2 = "dpmac@5"; …

MACs.csv (996 Bytes) http://temp.sh/ITbNg/clearfog-s1_3-s2_9-dpc.dts I want just adjust clearfog-s1_3-s2_dpc.dts with the MAC from the CSV file and rebuild the image with docker. How I know which MAC goes to @mac3 etc? I can’t see any port number in the csv file

our BSP actually reads a base MAC address from the eeprom in TLV format and then increments them based on the number set in the same eeprom. This is per the ONIE specification. You can use the tlv_eeprom command to inspect and change the configuration. As per which MAC address overrides which betw…

Ok thank you have a look to the code. So if execute on a existing system the tlv_eeprom command to see which MAC is on a existing port and then adjust dpc file with the rights MAC address. I need also to adjust Temp.sh | clearfog-s1_3-s2_9-dpl.dts the connection function like this? connections {…

I feel little bit stupid but when I DON’T adjust the dpl files and build the images with docker and the option clearfog-s1_3-s2_9 and flash the SPI and eMMC so would the Interfaces presistent?

How I make NIC config and DHCP presistent?

NXP LX2160

jnettlet July 4, 2024, 9:15am 5

did you rebuild the image, or dd the .dtb onto the boot medium at the proper offset?

Topic		Replies	Views
U-boot doesn't set dpmac.1? NXP LX2160	5	325	August 7, 2023
Eth1 gets random mac address NXP LX2160	0	60	July 8, 2024
Eth0 not working (ClearFog / LX2160) NXP LX2160	23	3148	June 1, 2022
Kernel does not see mac address set by u-boot NXP LX2160	6	496	August 3, 2023
DPSW on CEX7 NXP LX2160 NXP-LX2160	6	780	August 17, 2022

How I make NIC config and DHCP presistent?

Related topics