Hi All,
HoneyComb LX2k Rev A09: Error
I attempted to boot using the Micro SD card with the image lx2160a_rev2_cex7_honeycomb_2000_700_2900_18_5_2-fd60614.img. I was able to log in to the BusyBox Distro. However, my goal is to install a full Ubuntu ARM or Fedora OS.
Unfortunately, I’m encountering the following error and am unable to proceed:
NOTICE: BL2: Built : 11:55:25, Apr 9 2025
NOTICE: UDIMM KF3200C20S4/16G
NOTICE: DDR4 UDIMM with 1-rank 64-bit bus (x8)
NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC off, 256B
ERROR: BL2: Failed to load image id 3 (-2)
Authentication failure
NOTICE: BL2: v2.6(release):lf-5.15.71-2.2.0-22-g767e70cd3
NOTICE: BL2: Built : 11:55:25, Apr 9 2025
NOTICE: UDIMM KF3200C20S4/16G
NOTICE: DDR4 UDIMM with 1-rank 64-bit bus (x8)
NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC off, 256B
ERROR: BL2: Failed to load image id 3 (-2)
Authentication failure
NOTICE: BL2: v2.6(release):lf-5.15.71-2.2.0-22-g767e70cd3
NOTICE: BL2: Built : 11:55:25, Apr 9 2025
NOTICE: UDIMM KF3200C20S4/16G
NOTICE: DDR4 UDIMM with 1-rank 64-bit bus (x8)
NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC off, 256B
ERROR: BL2: Failed to load image id 3 (-2)
Authentication failure
NOTICE: BL2: v2.6(release):lf-5.15.71-2.2.0-22-g767e70cd3
NOTICE: BL2: Built : 11:55:25, Apr 9 2025
NOTICE: UDIMM KF3200C20S4/16G
ERROR: Failed to load 36 firmware.
ERROR: Loading firmware failed (error code -2)
ERROR: Calculating DDR PHY registers failed.
NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC off, 256B
ERROR: BL2: Failed to load image id 3 (-2)
Authentication failure
NOTICE: BL2: v2.6(release):lf-5.15.71-2.2.0-22-g767e70cd3
NOTICE: BL2: Built : 11:55:25, Apr 9 2025
NOTICE: UDIMM KF3200C20S4/16G
ERROR: Failed to load 36 firmware.
ERROR: Loading firmware failed (error code -2)
ERROR: Calculating DDR PHY registers failed.
NOTICE: 32 GB DDR4, 64-bit, CL=19, ECC off, 256B
ERROR: BL2: Failed to load image id 3 (-2)
Authentication failure
I tried new SD CARD and now NO output on console.
In my Linux machine
[ 1089.750538] usb 1-11: new full-speed USB device number 4 using xhci_hcd
[ 1089.883904] usb 1-11: New USB device found, idVendor=0403, idProduct=6015, bcdDevice=10.00
[ 1089.883921] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1089.883930] usb 1-11: Product: FT230X Basic UART
[ 1089.883938] usb 1-11: Manufacturer: FTDI
[ 1089.883944] usb 1-11: SerialNumber: DQ00FOD8
[ 1089.889043] ftdi_sio 1-11:1.0: FTDI USB Serial Device converter detected
[ 1089.889136] usb 1-11: Detected FT-X
[ 1089.890893] usb 1-11: FTDI USB Serial Device converter now attached to ttyUSB0
NO output on console.
ticket ID is : 00053442