Changing Console from UART2 to UART4

NXP i.MX8M Plus
1

Hi,

I am currently using humming-board-pulse. I want UART4 to act as serial console instead of UART2. Done modifications in below attached u-boot files. Are my changes correct?

Apart from u-boot & kernel do i need to make changes in any other folders.

Paths and files

  1. tmp/work/imx8mpsolidrun-poky-linux/u-boot-imx/2022.04-r0/git/board/solidrun/imx8mp_solidrun/imx8mp_solidrun.c
    imx8mp_solidrun.c.txt (18.7 KB)

  2. tmp/work/imx8mpsolidrun-poky-linux/u-boot-imx/2022.04-r0/git/include/configs/imx8mp_solidrun.h
    imx8mp_solidrun.h.txt (5.9 KB)

  3. tmp/work/imx8mpsolidrun-poky-linux/u-boot-imx/2022.04-r0/git/arch/arm/dts/imx8mp-solidrun.dts
    imx8mp-solidrun.dts.txt (14.8 KB)

  4. tmp/work/imx8mpsolidrun-poky-linux/u-boot-imx/2022.04-r0/git/arch/arm/dts/imx8mp-solidrun-u-boot.dtsi.
    imx8mp-solidrun-u-boot.dtsi.txt (4.2 KB)

Thanks,
Kartheek