# \#NXP-LX2160 **URL:** https://community.solid-run.com/tag/nxp-lx2160/4.md [Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md) --- ## [Modern-ish GPUs supported on this board?](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155)
**Author:** [@andy.nicholson](https://community.solid-run.com/u/andy.nicholson)\ **Replies:** 0\ **Last updated:** [August 25, 2026, 12:08am UTC](https://community.solid-run.com/t/modern-ish-gpus-supported-on-this-board/1155 "2026-08-25T00:08:55Z")
I’ve been running my machine on an AMD RX570 with the amdgpu driver for a few years now. Has anyone managed to run a more recent Radeon board on theirs? Considering trying to get a 9060 running. --- ## [HoneyComb SATA performance issues](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103)
**Author:** [@ed.roach](https://community.solid-run.com/u/ed.roach)\ **Replies:** 1\ **Last updated:** [July 17, 2026, 2:00pm UTC](https://community.solid-run.com/t/honeycomb-sata-performance-issues/1103 "2026-07-17T14:00:29Z")
I’ve run into the same issue as this thread on two LX2160A HoneyComb boards, but only specifically on SATA ports SATA0 and SATA2 (U32) — the other two function just fine and reliably. With certain SATA drives, SATA0 is p… --- ## [ClearFog CX2 LX2160A Dev Board - Write to SRKH Registers in RSP using JTAG](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115)
**Author:** [@jhammerberg](https://community.solid-run.com/u/jhammerberg)\ **Replies:** 0\ **Last updated:** [March 11, 2026, 5:08pm UTC](https://community.solid-run.com/t/clearfog-cx2-lx2160a-dev-board-write-to-srkh-registers-in-rsp-using-jtag/1115 "2026-03-11T17:08:17Z")
Hello, I’ve been trying to enable and demo secure boot on the ClearFog CX2 Dev Board for the LX2160A. I’ve made a software image with Yocto which I believe has secure boot enabled, although it’s hard to tell given that … --- ## [Enabling single-DIMM operations in the secondary DIMM slot](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068)
**Author:** [@romameie](https://community.solid-run.com/u/romameie)\ **Replies:** 2\ **Last updated:** [March 11, 2026, 9:17am UTC](https://community.solid-run.com/t/enabling-single-dimm-operations-in-the-secondary-dimm-slot/1068 "2026-03-11T09:17:14Z")
I am in possession of a LX2160A CEx7 CoM with a broken primary DIMM slot. Firmware images fail to boot with a DIMM in the secondary DIMM slot, because there is a bug after disabling the first DDR controller in the upstr… --- ## [LX2160A DPDK Example Use Case - Software Packet Distributor](https://community.solid-run.com/t/lx2160a-dpdk-example-use-case-software-packet-distributor/1101)
**Author:** [@MikeChangENGR](https://community.solid-run.com/u/MikeChangENGR)\ **Replies:** 2\ **Last updated:** [February 4, 2026, 12:12pm UTC](https://community.solid-run.com/t/lx2160a-dpdk-example-use-case-software-packet-distributor/1101 "2026-02-04T12:12:39Z")
Hi all, We’re releasing SPD v1.0.5 — a DPDK-based, software-only Ethernet packet distributor that adds a Greedy Reshaper to reduce worker imbalance under elephant-flow skew. What it is • Software-only & portable: no … --- ## [Binaries showing Exec format error when trying to run](https://community.solid-run.com/t/binaries-showing-exec-format-error-when-trying-to-run/1072)
**Author:** [@NaKel](https://community.solid-run.com/u/NaKel)\ **Replies:** 1\ **Last updated:** [September 23, 2025, 4:09pm UTC](https://community.solid-run.com/t/binaries-showing-exec-format-error-when-trying-to-run/1072 "2025-09-23T16:09:42Z")
Hello team, I have built my own carrier board with Lx2160a solidrun ComE module. I am using the delvelop-ls-5.15.72-2.2.0 branch to build the linux using Docker on a VM. uname -a Linux sync008 6.8.0-78-generic #78~22.0… --- ## [DPDK not working on LX2160A ClearFog](https://community.solid-run.com/t/dpdk-not-working-on-lx2160a-clearfog/1071)
**Author:** [@Vbashamoni](https://community.solid-run.com/u/Vbashamoni)\ **Replies:** 0\ **Last updated:** [September 18, 2025, 5:51pm UTC](https://community.solid-run.com/t/dpdk-not-working-on-lx2160a-clearfog/1071 "2025-09-18T17:51:09Z")
I was able to boot the BSP successfully on Clear-Fog LX2160A board and working on enabling DPDK with the onboard SFP+ ports. I’m able to bind as SFP module to DPDK (via vfio-fsl-mc), but when I attempt to start DPDK test… --- ## [How to install NVIDIA Graphic Card on LX2160A](https://community.solid-run.com/t/how-to-install-nvidia-graphic-card-on-lx2160a/366)
**Author:** [@vader](https://community.solid-run.com/u/vader)\ **Replies:** 22\ **Last updated:** [September 7, 2025, 5:03pm UTC](https://community.solid-run.com/t/how-to-install-nvidia-graphic-card-on-lx2160a/366 "2025-09-07T17:03:56Z")
I want to install GPU on LX2160A to train AI data,but I don’t know how to install a NVIDIA GPU on LX2160A. Pls someone could tell me how to operate with it? --- ## [HoneyComb LX2160A - DPDK not working](https://community.solid-run.com/t/honeycomb-lx2160a-dpdk-not-working/1038)
**Author:** [@Rafal](https://community.solid-run.com/u/Rafal)\ **Replies:** 0\ **Last updated:** [July 16, 2025, 12:04pm UTC](https://community.solid-run.com/t/honeycomb-lx2160a-dpdk-not-working/1038 "2025-07-16T12:04:06Z")
Hello, I have a problem with making DPDK working on HoneyComb LX2160A platform. I have dpmac.10/dpni.4 connected with fiber to the external switch. When dpni is in linux everything is ok. The link status on switch is u… --- ## [Fd.io VPP on LX2160?](https://community.solid-run.com/t/fd-io-vpp-on-lx2160/549)
**Author:** [@agv100](https://community.solid-run.com/u/agv100)\ **Replies:** 3\ **Last updated:** [July 6, 2025, 3:09pm UTC](https://community.solid-run.com/t/fd-io-vpp-on-lx2160/549 "2025-07-06T15:09:12Z")
Dear SolidRun community members, Does anybody have any experience or attempts to run fd.io VPP dataplane on LX2160 platform? I already have some attempts to do that, with unsatisfactory results. The performance was qui… --- ## [SoliRun HoneyComb LX2K(LX2160A) suspend to RAM feature](https://community.solid-run.com/t/solirun-honeycomb-lx2k-lx2160a-suspend-to-ram-feature/1034)
**Author:** [@yzhuang](https://community.solid-run.com/u/yzhuang)\ **Replies:** 0\ **Last updated:** [July 2, 2025, 8:06pm UTC](https://community.solid-run.com/t/solirun-honeycomb-lx2k-lx2160a-suspend-to-ram-feature/1034 "2025-07-02T20:06:46Z")
We are trying to enable some powermanagement features on QNX with honeycomb LX2K(LX2160A) platform. Some researches from our side shows this feature is not even supported on linux. We would like to confirm whether it is … --- ## [HoneyComb: Boot Authentication failure](https://community.solid-run.com/t/honeycomb-boot-authentication-failure/996)
**Author:** [@kvinay](https://community.solid-run.com/u/kvinay)\ **Replies:** 2\ **Last updated:** [April 22, 2025, 7:53am UTC](https://community.solid-run.com/t/honeycomb-boot-authentication-failure/996 "2025-04-22T07:53:05Z")
Hi All, HoneyComb LX2k Rev A09: Error I attempted to boot using the Micro SD card with the image lx2160a\_rev2\_cex7\_honeycomb\_2000\_700\_2900\_18\_5\_2-fd60614.img. I was able to log in to the BusyBox Distro. However, my goa… --- ## [Bl31.elf has a LOAD segment with RWX permissions](https://community.solid-run.com/t/bl31-elf-has-a-load-segment-with-rwx-permissions/993)
**Author:** [@aravind.kannan](https://community.solid-run.com/u/aravind.kannan)\ **Replies:** 0\ **Last updated:** [April 8, 2025, 10:12am UTC](https://community.solid-run.com/t/bl31-elf-has-a-load-segment-with-rwx-permissions/993 "2025-04-08T10:12:09Z")
i am using runme.sh and i get it does not get built. it fails with make error : aarch64-linux-gnu-ld.bfd: warning: /home/user/lx2160\_build/lx2160a\_build/build/atf/build/lx2160acex7/release/bl31/bl31.elf has a LOAD segme… --- ## [Where to get BL31 v2.4 version](https://community.solid-run.com/t/where-to-get-bl31-v2-4-version/990)
**Author:** [@hchukka](https://community.solid-run.com/u/hchukka)\ **Replies:** 0\ **Last updated:** [April 2, 2025, 3:21pm UTC](https://community.solid-run.com/t/where-to-get-bl31-v2-4-version/990 "2025-04-02T15:21:07Z")
I am using Honeycomb Hardware which has BL31: v2.4 version. The question is where to get this specific version of BL31. Thanks in advance for your support. --- ## [LX2160 Always restart on power failure](https://community.solid-run.com/t/lx2160-always-restart-on-power-failure/648)
**Author:** [@austin](https://community.solid-run.com/u/austin)\ **Replies:** 5\ **Last updated:** [November 29, 2024, 2:27pm UTC](https://community.solid-run.com/t/lx2160-always-restart-on-power-failure/648 "2024-11-29T14:27:37Z")
Does anyone know how to configure the LX2160 to always restart on power failure? I recently got a dual Honeycomb LX2 server and configured it following the guide at https://solidrun.atlassian.net/wiki/spaces/developer/pa… --- ## [Honeycomb LX2160 - First bootup RAM training problems](https://community.solid-run.com/t/honeycomb-lx2160-first-bootup-ram-training-problems/924)
**Author:** [@AreYouLoco](https://community.solid-run.com/u/AreYouLoco)\ **Replies:** 4\ **Last updated:** [November 21, 2024, 8:26am UTC](https://community.solid-run.com/t/honeycomb-lx2160-first-bootup-ram-training-problems/924 "2024-11-21T08:26:35Z")
Hi, I just assembled everything in the rack and tried to boot up. But I am facing some problems. I guess thats because of RAM training. NOTICE: BL2: v2.6(release):lf-5.15.71-2.2.0-14-g38bb9e491 NOTICE: BL2: Built : … --- ## [PCI Passthrough Failing](https://community.solid-run.com/t/pci-passthrough-failing/925)
**Author:** [@matta](https://community.solid-run.com/u/matta)\ **Replies:** 1\ **Last updated:** [November 21, 2024, 7:01am UTC](https://community.solid-run.com/t/pci-passthrough-failing/925 "2024-11-21T07:01:57Z")
After updating to the develop-ls-5.15.71-2.2.0 branch in the lx2160a\_build repository, I am receiving the following error messages when attempting to bind a PCI device to the vfio-pci driver and then start a VM. vfio-pc… --- ## [OpenWRT for SolidRun HoneyComb LX2](https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570)
**Author:** [@mefer](https://community.solid-run.com/u/mefer)\ **Replies:** 1\ **Last updated:** [September 30, 2024, 8:31pm UTC](https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570 "2024-09-30T20:31:35Z")
How to use the OpenWRT distribution on a HoneyComb LX2 device. Is there an instruction for assembling the installation distribution or how to install it on the device? --- ## [Ubuntu Image fails to boot on Clearfog LX2K](https://community.solid-run.com/t/ubuntu-image-fails-to-boot-on-clearfog-lx2k/71)
**Author:** [@blien](https://community.solid-run.com/u/blien)\ **Replies:** 16\ **Last updated:** [September 5, 2024, 7:17pm UTC](https://community.solid-run.com/t/ubuntu-image-fails-to-boot-on-clearfog-lx2k/71 "2024-09-05T19:17:00Z")
I downloaded the lx2160acex7\_2000\_700\_3200\_8\_5\_2-2fff64e.img from solid run website. I know my RAM is 3200 which should match the listed image. I cannot get this image to boot and get the error as seen in below console… --- ## [No PCIe devices](https://community.solid-run.com/t/no-pcie-devices/865)
**Author:** [@Morta](https://community.solid-run.com/u/Morta)\ **Replies:** 12\ **Last updated:** [August 21, 2024, 8:24am UTC](https://community.solid-run.com/t/no-pcie-devices/865 "2024-08-21T08:24:58Z")
Configuration https://www.eetgroup.com/en-ie/mt-512t-coreparts-512gb-msata-ssd-wid-w124665726 SERDES:=LX2162A\_CLEARFOG\_18\_9\_0 root@LX2162a:~# dmesg | grep -i pci \[ 0.000000\] Kernel command line: console=ttyAMA… --- ## [Linux driver changes when building lx2160a\_build with docker](https://community.solid-run.com/t/linux-driver-changes-when-building-lx2160a-build-with-docker/873)
**Author:** [@Hieudon](https://community.solid-run.com/u/Hieudon)\ **Replies:** 1\ **Last updated:** [July 26, 2024, 1:50am UTC](https://community.solid-run.com/t/linux-driver-changes-when-building-lx2160a-build-with-docker/873 "2024-07-26T01:50:01Z")
Hello, I have been using these 2 commands to build the lx2160a\_build image with docker. docker build -t lx2160a\_build docker docker run --rm -i -t -v “$PWD”:/work lx2160a\_build -u $(id -u) -g $(id -g) I was able to s… --- ## [ITS device ID for PCI devices](https://community.solid-run.com/t/its-device-id-for-pci-devices/871)
**Author:** [@Hieudon](https://community.solid-run.com/u/Hieudon)\ **Replies:** 2\ **Last updated:** [July 24, 2024, 7:28am UTC](https://community.solid-run.com/t/its-device-id-for-pci-devices/871 "2024-07-24T07:28:44Z")
Hello, I am using the Honeycomb LX2 and I observe that the u-boot calculates the ITS device ID (stream ID) of PCI devices and add the “msi-map” which includes the stream ID in the device tree. The Linux will use this ID… --- ## [LX2160 DDR4 Out of reset but no DDR Clock](https://community.solid-run.com/t/lx2160-ddr4-out-of-reset-but-no-ddr-clock/829)
**Author:** [@KLN](https://community.solid-run.com/u/KLN)\ **Replies:** 0\ **Last updated:** [April 1, 2024, 11:09am UTC](https://community.solid-run.com/t/lx2160-ddr4-out-of-reset-but-no-ddr-clock/829 "2024-04-01T11:09:01Z")
Hi Team, We are working on custom LX2160 based board, We have DDR issue, DDR Controller is coming out of reset, But no DDR Clock was observed during Codewarrior DDR Test Have you faced any similar issues previously. … --- ## [Secure boot fuse programming](https://community.solid-run.com/t/secure-boot-fuse-programming/785)
**Author:** [@kairovini](https://community.solid-run.com/u/kairovini)\ **Replies:** 4\ **Last updated:** [March 11, 2024, 3:32pm UTC](https://community.solid-run.com/t/secure-boot-fuse-programming/785 "2024-03-11T15:32:19Z")
I’m trying to setup secure boot on ClearFog CX LX2 (lx2160a-cex7). Following NXP instructions for secure boot, I need to enable POVDD for fuse provisioning. In cex7 schematics, I can see that EN\_SFP\_PROG exists, but how … --- ## [Lx2160a\_build of Ubuntu20 resize of eMMC partition not possible because it is mounted, instructions update?](https://community.solid-run.com/t/lx2160a-build-of-ubuntu20-resize-of-emmc-partition-not-possible-because-it-is-mounted-instructions-update/824)
**Author:** [@pibowman](https://community.solid-run.com/u/pibowman)\ **Replies:** 0\ **Last updated:** [March 6, 2024, 11:50pm UTC](https://community.solid-run.com/t/lx2160a-build-of-ubuntu20-resize-of-emmc-partition-not-possible-because-it-is-mounted-instructions-update/824 "2024-03-06T23:50:48Z")
Following the LX2 Quick Start Guide, after doinf load/write to eMMC, change switch, reboot: root@localhost:~# fdisk /dev/mmcblk1 Command (m for help): p Disk /dev/mmcblk1: 59.22 GiB, 63585648640 bytes, 124190720 secto… --- ## [Upstream Kernel Status](https://community.solid-run.com/t/upstream-kernel-status/751)
**Author:** [@neiljones](https://community.solid-run.com/u/neiljones)\ **Replies:** 5\ **Last updated:** [October 27, 2023, 2:45pm UTC](https://community.solid-run.com/t/upstream-kernel-status/751 "2023-10-27T14:45:55Z")
Probably a question for NXP, but, What is the status of the LX2160 in the upstream (kernel.org) Linux tree ? I can see the dts files for cex7 have been there since v5.6, so quite a while. Cheers, Neil --- ## [uImage / fitImage support](https://community.solid-run.com/t/uimage-fitimage-support/665)
**Author:** [@LouisJ](https://community.solid-run.com/u/LouisJ)\ **Replies:** 1\ **Last updated:** [June 18, 2023, 5:35am UTC](https://community.solid-run.com/t/uimage-fitimage-support/665 "2023-06-18T05:35:03Z")
Hi, I’ve been trying without success to boot uImage / fitImage linux kernel format. I am using the bootchain / firmware from lx2160a\_build script flashed on a SD Card. During the boot, I manually interrupt the autoboo… --- ## [How to test 100G port on LX2160](https://community.solid-run.com/t/how-to-test-100g-port-on-lx2160/658)
**Author:** [@vader](https://community.solid-run.com/u/vader)\ **Replies:** 2\ **Last updated:** [June 1, 2023, 10:50am UTC](https://community.solid-run.com/t/how-to-test-100g-port-on-lx2160/658 "2023-06-01T10:50:21Z")
I want to use ptkgen to test 100G port, but has such error messages when plug QSFP28 transceiver. /usr/local/bin# \[ 2374.565278\] sfp qsfp-0: EEPROM base structure checksum failure: 0x0d != 0x00 \[ 2374.572350\] sfp EE: 0… --- ## [Hailo #nxp-lx2160](https://community.solid-run.com/t/hailo-nxp-lx2160/654)
**Author:** [@devilhands](https://community.solid-run.com/u/devilhands)\ **Replies:** 0\ **Last updated:** [May 28, 2023, 3:38am UTC](https://community.solid-run.com/t/hailo-nxp-lx2160/654 "2023-05-28T03:38:31Z")
I’m tring to port hailo pci driver on LX2160ACEX7(LSDK-21.08). but i had some problem. we can download hailo-8 source code. (https://github.com/hailo-ai/hailort-drivers.git) when I do insmod hailo\_pci.ko, it is holt li… --- ## [LX2160 COMe SSD Encryption](https://community.solid-run.com/t/lx2160-come-ssd-encryption/641)
**Author:** [@Avishai](https://community.solid-run.com/u/Avishai)\ **Replies:** 0\ **Last updated:** [May 11, 2023, 1:56pm UTC](https://community.solid-run.com/t/lx2160-come-ssd-encryption/641 "2023-05-11T13:56:41Z")
Hi, Is it possible to encrypt the SSD connected to the LX2160 COMe? I would like to make sure it is secured, maybe similar to TPM on x86 systems? [Next page](https://community.solid-run.com/tag/nxp-lx2160/4.md?match_all_tags=true&page=1&tags%5B%5D=NXP-LX2160)