# \#iMX8M-plus **URL:** https://community.solid-run.com/tag/imx8m-plus/3.md [Latest](https://community.solid-run.com/latest.md) · [Categories](https://community.solid-run.com/categories.md) · [Tags](https://community.solid-run.com/tags.md) --- ## [i.MX8MP second ethernet](https://community.solid-run.com/t/i-mx8mp-second-ethernet/1054)
**Author:** [@RadU-Callum](https://community.solid-run.com/u/RadU-Callum)\ **Replies:** 14\ **Last updated:** [October 3, 2025, 4:25pm UTC](https://community.solid-run.com/t/i-mx8mp-second-ethernet/1054 "2025-10-03T16:25:53Z")
Hello, I am currently working with the i.MX8M Plus SOM. I see that the SOM supports two Giga Ethernet interfaces. There is a note attached to this page that says “Please note that default SOM configuration includes only… --- ## [How to enable USB OTG functionality on Hummingboard Pulse?](https://community.solid-run.com/t/how-to-enable-usb-otg-functionality-on-hummingboard-pulse/705)
**Author:** [@pflander](https://community.solid-run.com/u/pflander)\ **Replies:** 3\ **Last updated:** [September 3, 2025, 1:29pm UTC](https://community.solid-run.com/t/how-to-enable-usb-otg-functionality-on-hummingboard-pulse/705 "2025-09-03T13:29:26Z")
I am using Hummingboard Pulse evaluation board + IMX8MP SOM with Yocto Kirkstone. I want to configure USB OTG functionality to use the board’s USB port as for example UVC camera. How do I proceed? Do I have to modify de… --- ## [Humming Board interface with 5G GSM module](https://community.solid-run.com/t/humming-board-interface-with-5g-gsm-module/1060)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 0\ **Last updated:** [August 18, 2025, 11:28am UTC](https://community.solid-run.com/t/humming-board-interface-with-5g-gsm-module/1060 "2025-08-18T11:28:15Z")
Hi, We are currently using the HummingBoard Pulse v2.5 for product validation and are exploring options to interface 4G or 5G GSM modules with the board. We have identified the Quectel EC25 4G GSM module, which can b… --- ## [How to generate the imx8mp-evk-rpmsg.dtb file](https://community.solid-run.com/t/how-to-generate-the-imx8mp-evk-rpmsg-dtb-file/1053)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 0\ **Last updated:** [August 4, 2025, 10:05am UTC](https://community.solid-run.com/t/how-to-generate-the-imx8mp-evk-rpmsg-dtb-file/1053 "2025-08-04T10:05:54Z")
Hi Team, I am using the imx8mp solidrun board and i want to enable the M7 core to run some application. So i have followed this below document and modified the imx8mp-evk-rpmsg.dts to do that but there are no steps to g… --- ## [How do we know the programming is running on cortex M7 successfully](https://community.solid-run.com/t/how-do-we-know-the-programming-is-running-on-cortex-m7-successfully/1048)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 3\ **Last updated:** [August 1, 2025, 10:56am UTC](https://community.solid-run.com/t/how-do-we-know-the-programming-is-running-on-cortex-m7-successfully/1048 "2025-08-01T10:56:17Z")
Hi, Hello Team, We are currently using the i.MX8MP Humming Board for our development, and we’ve deployed an application targeting the Cortex-M7 core. We would like to confirm whether the application is running successf… --- ## [Issue Setting 59.9Hz Refresh Rate on Solidrun HummingBoard Pulse (i.MX8M Plus) with Weston](https://community.solid-run.com/t/issue-setting-59-9hz-refresh-rate-on-solidrun-hummingboard-pulse-i-mx8m-plus-with-weston/973)
**Author:** [@RadU-Callum](https://community.solid-run.com/u/RadU-Callum)\ **Replies:** 19\ **Last updated:** [July 9, 2025, 9:35am UTC](https://community.solid-run.com/t/issue-setting-59-9hz-refresh-rate-on-solidrun-hummingboard-pulse-i-mx8m-plus-with-weston/973 "2025-07-09T09:35:36Z")
Hello, I am developing a video playback application on the Solidrun HummingBoard Pulse (i.MX8M Plus) and have built a Yocto image following the meta-solidrun-arm-imx8 GitHub repository. I am using Weston as the composito… --- ## [Need a Kirstone based Image for imx8mp Humming Board Pulse](https://community.solid-run.com/t/need-a-kirstone-based-image-for-imx8mp-humming-board-pulse/959)
**Author:** [@j.lokesh](https://community.solid-run.com/u/j.lokesh)\ **Replies:** 2\ **Last updated:** [January 15, 2025, 12:39pm UTC](https://community.solid-run.com/t/need-a-kirstone-based-image-for-imx8mp-humming-board-pulse/959 "2025-01-15T12:39:49Z")
Hello there, I’m working with IMX8MP based Humming Board Pulse. But from the website I’m getting a Debian Image for booting the board. Is it possible to get an Image of Kirkstone instead of Debian.?? I’m working on Ki… --- ## [USB3.0 based camera stream is not working correctly on IMX8MP Humming Board Pulse with Kirkstone Build Image](https://community.solid-run.com/t/usb3-0-based-camera-stream-is-not-working-correctly-on-imx8mp-humming-board-pulse-with-kirkstone-build-image/960)
**Author:** [@j.lokesh](https://community.solid-run.com/u/j.lokesh)\ **Replies:** 1\ **Last updated:** [January 10, 2025, 4:09pm UTC](https://community.solid-run.com/t/usb3-0-based-camera-stream-is-not-working-correctly-on-imx8mp-humming-board-pulse-with-kirkstone-build-image/960 "2025-01-10T16:09:28Z")
Hello there, I’m working with Humming Board Pulse with Kirkstone Image, and I’m seeing that when I use USB3.0 Visible camera, then camera gets detected but while streaming the expected 30FPS stream drops down to 2-3 FPS… --- ## [Bridging ethernets on imx8m plus som](https://community.solid-run.com/t/bridging-ethernets-on-imx8m-plus-som/918)
**Author:** [@RadU-Callum](https://community.solid-run.com/u/RadU-Callum)\ **Replies:** 1\ **Last updated:** [November 3, 2024, 6:00am UTC](https://community.solid-run.com/t/bridging-ethernets-on-imx8m-plus-som/918 "2024-11-03T06:00:28Z")
I am currently working with one of your imx8m plus hummingboards. I have tried to bridge the ethernet ports ‘end0’ and ‘enp1s0’. I am able to add ‘enp1s0’ to the bridge. However, when I add ‘end0’ to the bridge and when … --- ## [Implementation of matter protocol on i.MX8M Plus Solidrun Board](https://community.solid-run.com/t/implementation-of-matter-protocol-on-i-mx8m-plus-solidrun-board/864)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 6\ **Last updated:** [August 12, 2024, 6:02am UTC](https://community.solid-run.com/t/implementation-of-matter-protocol-on-i-mx8m-plus-solidrun-board/864 "2024-08-12T06:02:16Z")
Hi, I wish to use the i.MX8M Plus Solidrun board to develop a matter protocol. However, I couldn’t find anything on this board’s matter protocol. After looking through the link below, I learned that they support the i.… --- ## [Getting delay of stopping the running services in the background when reboot happens](https://community.solid-run.com/t/getting-delay-of-stopping-the-running-services-in-the-background-when-reboot-happens/835)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 1\ **Last updated:** [April 25, 2024, 8:56am UTC](https://community.solid-run.com/t/getting-delay-of-stopping-the-running-services-in-the-background-when-reboot-happens/835 "2024-04-25T08:56:02Z")
Hi, I am making the wifi ap mode to default in the imx8mp solidrun board by creating the own service. config.sh is my script file which is having all configuration settings like below. #!/bin/bash echo -e “ctrl\_inte… --- ## [HummingBoard Mate. MicroSD Booting Error](https://community.solid-run.com/t/hummingboard-mate-microsd-booting-error/763)
**Author:** [@EnricAR](https://community.solid-run.com/u/EnricAR)\ **Replies:** 4\ **Last updated:** [March 4, 2024, 11:53pm UTC](https://community.solid-run.com/t/hummingboard-mate-microsd-booting-error/763 "2024-03-04T23:53:20Z")
I am following the “HummingBoard Mate & i. MX8M Plus SOM Quick Start Guide” and I’m doing the booting from SD card option. I am booting this img: sr-imx8-debian-bullseye-20230623-cli-imx8mp-sdhc.img Once I have connect… --- ## [Configure USB 2.0 as slave / device](https://community.solid-run.com/t/configure-usb-2-0-as-slave-device/823)
**Author:** [@Kartheek](https://community.solid-run.com/u/Kartheek)\ **Replies:** 1\ **Last updated:** [March 4, 2024, 4:47am UTC](https://community.solid-run.com/t/configure-usb-2-0-as-slave-device/823 "2024-03-04T04:47:36Z")
Hello, I am using i.MX 8MP Plus humming board. In that USB 1 is used as Host. However, I would like to use the USB as a device /slave. Could you please let me know what is needed to be done to configure it as slave. P… --- ## [How to enable the UART4 in IMX8MP soildrun hardknott build](https://community.solid-run.com/t/how-to-enable-the-uart4-in-imx8mp-soildrun-hardknott-build/818)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 0\ **Last updated:** [February 16, 2024, 12:25pm UTC](https://community.solid-run.com/t/how-to-enable-the-uart4-in-imx8mp-soildrun-hardknott-build/818 "2024-02-16T12:25:22Z")
Hi, I wish to allow external devices to communicate with the UART4 pins. Therefore, kindly advise me on how to make UART4 available in the imx8mp-hummingboard-pulse.dts file. I’m developing using the Hardknott version… --- ## [Basler MIPI CSI not detecting](https://community.solid-run.com/t/basler-mipi-csi-not-detecting/194)
**Author:** [@mobileoverlord](https://community.solid-run.com/u/mobileoverlord)\ **Replies:** 14\ **Last updated:** [February 14, 2024, 3:18pm UTC](https://community.solid-run.com/t/basler-mipi-csi-not-detecting/194 "2024-02-14T15:18:21Z")
Hello, I am trying to get a Basler Dart daA3840 CSI Camera connected and working with the MIPI CSI port on the iMX8 M Plus SOM. I have built the imx-image-full in yocto using Gatesgarth successfully. At runtime I am rec… --- ## [Kirkstone Image dosen't works on all IMX8MP-Hummingboard-pulse SOMs](https://community.solid-run.com/t/kirkstone-image-dosent-works-on-all-imx8mp-hummingboard-pulse-soms/811)
**Author:** [@j.lokesh](https://community.solid-run.com/u/j.lokesh)\ **Replies:** 6\ **Last updated:** [February 6, 2024, 5:11am UTC](https://community.solid-run.com/t/kirkstone-image-dosent-works-on-all-imx8mp-hummingboard-pulse-soms/811 "2024-02-06T05:11:10Z")
Hello there, I’ve been working on IMX8MP-hummingboard-pulse SOM since couple of years with Hardknott Yocto Image and everything was fine. But recently our SW requirements got changed and for that we have to move to Kirk… --- ## [Modifying device tree to add new peripherals](https://community.solid-run.com/t/modifying-device-tree-to-add-new-peripherals/798)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 1\ **Last updated:** [January 11, 2024, 8:36am UTC](https://community.solid-run.com/t/modifying-device-tree-to-add-new-peripherals/798 "2024-01-11T08:36:16Z")
We are building a custom board using the Imx8mp processor and we are using the imx8mp hummingboard pulse as our eval kit. We are using yocto kirkstone to build the image for the same. As an example I’m looking at pinmu… --- ## [Unable to establish BLE connection between solidrun and mobile nRF connect tool](https://community.solid-run.com/t/unable-to-establish-ble-connection-between-solidrun-and-mobile-nrf-connect-tool/789)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 3\ **Last updated:** [December 22, 2023, 9:42am UTC](https://community.solid-run.com/t/unable-to-establish-ble-connection-between-solidrun-and-mobile-nrf-connect-tool/789 "2023-12-22T09:42:57Z")
Hi, Am using bluez5.56 stack python test examples to establish BLE communication with mobile but am unable connect to the services of BLE in my mobile. Sometimes only it is connecting not all the time. Can you please s… --- ## [Tensorflow on the Hummingboard pulse?](https://community.solid-run.com/t/tensorflow-on-the-hummingboard-pulse/792)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 3\ **Last updated:** [December 21, 2023, 1:59pm UTC](https://community.solid-run.com/t/tensorflow-on-the-hummingboard-pulse/792 "2023-12-21T13:59:01Z")
Is there Tensorflow support on the IMX8mp Hummingboard pulse? --- ## [Reset pin on JTAG unavailable](https://community.solid-run.com/t/reset-pin-on-jtag-unavailable/791)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 1\ **Last updated:** [December 21, 2023, 10:14am UTC](https://community.solid-run.com/t/reset-pin-on-jtag-unavailable/791 "2023-12-21T10:14:24Z")
We are building a custom board basing the Humming board pulse EVK The image shows the JTAG pins from the IMX8MP Processor The Image below shows the JTAG connector which we are using, which contains the RESET pin. … --- ## [How can i do smart config for 1MW Murata Wi-Fi module?](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 3\ **Last updated:** [December 13, 2023, 8:12am UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784 "2023-12-13T08:12:50Z")
Hi, Could you please let me know the smart configuration procedure for 1MW Murata wi-fi module in access point mode. I am using i.MX 8M NXP controller with SDIO interface with Wi-Fi module. I have understood that TI de… --- ## [How to flash STM32 from iMX8MP using OpenOCD?](https://community.solid-run.com/t/how-to-flash-stm32-from-imx8mp-using-openocd/759)
**Author:** [@pflander](https://community.solid-run.com/u/pflander)\ **Replies:** 8\ **Last updated:** [December 7, 2023, 11:01am UTC](https://community.solid-run.com/t/how-to-flash-stm32-from-imx8mp-using-openocd/759 "2023-12-07T11:01:03Z")
I am using Hummingboard Pulse evaluation board + IMX8MP SOM with Yocto Kirkstone. I need to flash stm32 mcu from iMX8MP. I am using custom yocto image with openocd already installed. Here is my openocd.cfg file: sourc… --- ## [Options to boot other than SD card on humming board pulse](https://community.solid-run.com/t/options-to-boot-other-than-sd-card-on-humming-board-pulse/758)
**Author:** [@Kartheek](https://community.solid-run.com/u/Kartheek)\ **Replies:** 4\ **Last updated:** [November 14, 2023, 1:40pm UTC](https://community.solid-run.com/t/options-to-boot-other-than-sd-card-on-humming-board-pulse/758 "2023-11-14T13:40:39Z")
Hi Team, Humming Board Pulse is what I’m working on. In addition to the SD card, I want to boot from additional sources. Please include different methods for starting the humming board pulse. Thanks, Kartheek --- ## [BLE &Wifi reference schematic is missing in rev 1.2 SOM](https://community.solid-run.com/t/ble-wifi-reference-schematic-is-missing-in-rev-1-2-som/738)
**Author:** [@manoj](https://community.solid-run.com/u/manoj)\ **Replies:** 5\ **Last updated:** [November 9, 2023, 11:39am UTC](https://community.solid-run.com/t/ble-wifi-reference-schematic-is-missing-in-rev-1-2-som/738 "2023-11-09T11:39:17Z")
Dear team, we are using i.MX8M plus processor in our application and purchased the humming board so BLE & Wifi we are validating and the reference schematic is missing in attached link below could you please suggest wh… --- ## [Humming board pulse booting problem](https://community.solid-run.com/t/humming-board-pulse-booting-problem/755)
**Author:** [@Kartheek](https://community.solid-run.com/u/Kartheek)\ **Replies:** 0\ **Last updated:** [November 6, 2023, 4:39am UTC](https://community.solid-run.com/t/humming-board-pulse-booting-problem/755 "2023-11-06T04:39:42Z")
Hi team, I had a booting problem of humming board pulse board. While booting it shows black screen. May i know any solution for that. Attached below screen shot for your reference. Thanks, Kartheek --- ## [How to read/write i.MX8MP SOM's EEPROM?](https://community.solid-run.com/t/how-to-read-write-i-mx8mp-soms-eeprom/706)
**Author:** [@pflander](https://community.solid-run.com/u/pflander)\ **Replies:** 1\ **Last updated:** [August 21, 2023, 3:12pm UTC](https://community.solid-run.com/t/how-to-read-write-i-mx8mp-soms-eeprom/706 "2023-08-21T15:12:09Z")
I am using Hummingboard Pulse evaluation board + IMX8MP SOM with Yocto Kirkstone. I can see EEPROM IC on i2c address 0x50 and a binary file with it’s content on path: sys/class/i2c-dev/i2c-0/device/0-0050/eeprom. Bina… --- ## [How to wakeup from sleep with GPIO?](https://community.solid-run.com/t/how-to-wakeup-from-sleep-with-gpio/690)
**Author:** [@pflander](https://community.solid-run.com/u/pflander)\ **Replies:** 4\ **Last updated:** [August 2, 2023, 2:38pm UTC](https://community.solid-run.com/t/how-to-wakeup-from-sleep-with-gpio/690 "2023-08-02T14:38:41Z")
I am using Hummingboard Pulse evaluation board + IMX8MP SOM with Yocto Kirkstone. I want to configure wake up from sleep with GPIO, for example pin: MX8MP\_IOMUXC\_SAI2\_RXD0\_\_GPIO4\_IO23 I modified device tree like this: p… --- ## [I.MX8M SoM Yocto Linux Add DTB](https://community.solid-run.com/t/i-mx8m-som-yocto-linux-add-dtb/687)
**Author:** [@philbot999](https://community.solid-run.com/u/philbot999)\ **Replies:** 1\ **Last updated:** [July 24, 2023, 5:20pm UTC](https://community.solid-run.com/t/i-mx8m-som-yocto-linux-add-dtb/687 "2023-07-24T17:20:44Z")
I am evaluating the Analog Devices ADTF3175 time of flight eval kit: This kit contains the SolidRun iMX8M Plus SOM. Analog Devices provides instructions and a build script to use buildroot to produce a build. They have… --- ## [I.MX8M SoM Yocto U-Boot fw\_printenv fw\_setenv](https://community.solid-run.com/t/i-mx8m-som-yocto-u-boot-fw-printenv-fw-setenv/686)
**Author:** [@philbot999](https://community.solid-run.com/u/philbot999)\ **Replies:** 2\ **Last updated:** [July 24, 2023, 1:02pm UTC](https://community.solid-run.com/t/i-mx8m-som-yocto-u-boot-fw-printenv-fw-setenv/686 "2023-07-24T13:02:49Z")
I am using the Yocto ( Kirkstone ) meta-solidrun-arm-imx8 layer to successfully build for the I.MX8M Plus SoM. I need to access and set the U-Boot environment from Linux user space and so I need the fw\_printenv and fw\_s… --- ## [Imx8mp hummingboard fails to boot on eMMC](https://community.solid-run.com/t/imx8mp-hummingboard-fails-to-boot-on-emmc/673)
**Author:** [@shlomz](https://community.solid-run.com/u/shlomz)\ **Replies:** 3\ **Last updated:** [June 28, 2023, 11:03am UTC](https://community.solid-run.com/t/imx8mp-hummingboard-fails-to-boot-on-emmc/673 "2023-06-28T11:03:39Z")
HI, i created your default yocto image from build documentation for 5.10. the generated image tmp/deploy/images/imx8mpsolidrun/imx-image-multimedia-imx8mpsolidrun-20230625115741.rootfs.wic.bz2 was flashed to the eMMC … [Next page](https://community.solid-run.com/tag/imx8m-plus/3.md?match_all_tags=true&page=1&tags%5B%5D=iMX8M-plus)