# Update the som **URL:** \ **Category:** OCTEON CN9130\ **Created:** [July 12, 2022, 4:57pm UTC](https://community.solid-run.com/t/update-the-som/381 "2022-07-12T16:57:32Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![doudootiana](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@doudootiana](https://community.solid-run.com/u/doudootiana)\ **Post date:** [July 12, 2022, 4:57pm UTC](https://community.solid-run.com/t/update-the-som/381/1 "2022-07-12T16:57:32Z")
Hy ^^ I have a Clearfog base a388. I have bought the cn9130 som to update this one. Is it just plug and play hardwarely speaking? Thanks you. ---
**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\ **Post date:** [July 13, 2022, 4:36am UTC](https://community.solid-run.com/t/update-the-som/381/2 "2022-07-13T04:36:24Z")
On the old base I put electrical tape over the caps on the back of the baseboard under the SOM as a pre-caution. Other than that it snaps in and functions as normal. You will need a new u-boot, and kernel at a minimum, however I also recommend switching to a 64-bit userspace as well. ---
**Author:** ![doudootiana](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@doudootiana](https://community.solid-run.com/u/doudootiana)\ **Post date:** [December 20, 2022, 5:08pm UTC](https://community.solid-run.com/t/update-the-som/381/3 "2022-12-20T17:08:06Z")
Hy, i have an answer. if the clearfog pro was a 2.1 version, we must do some modifications. ![ECO CF-Pro to support switch - add Crystal Y2 support-1_page-0001](https://europe1.discourse-cdn.com/flex005/uploads/solid_run/original/1X/c1828ed255ceaae152880d0c758d607fcb2d9568.jpeg) ![ECO CF-Pro to support switch - add Crystal Y2 support-1_page-0002](https://europe1.discourse-cdn.com/flex005/uploads/solid_run/original/1X/7c228f6160e8455444b2b18808dd26b841f1d3ee.jpeg)