# U-Boot (ATF) failure LDSK-21.08 on ClearFog LX2

**URL:** https://community.solid-run.com/t/u-boot-atf-failure-ldsk-21-08-on-clearfog-lx2/316
**Category:** NXP LX2160
**Created:** [May 10, 2022, 5:01pm UTC](https://community.solid-run.com/t/u-boot-atf-failure-ldsk-21-08-on-clearfog-lx2/316 "2022-05-10T17:01:33Z")
**Posts on this page:** 1
**Showing post:** 7

<div class="post-metadata">

### Author: ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)
#### Post date: [May 11, 2022, 12:01pm UTC](https://community.solid-run.com/t/u-boot-atf-failure-ldsk-21-08-on-clearfog-lx2/316/7 "2022-05-11T12:01:46Z")

</div>

I just did a fresh clone and test build and was unable to replicate the BL2 image bloat you were seeing. However on my test machine I found that this patch was causing my machine to not boot from the usdhc card. Can you try and revert this commit from your build/rcw and test the image again?

`lx2160acex7: mode 8: use external PLLs`

If you are still having the bloat issue I can also share my patch that switches to gcc-10

---

_[View the full topic](https://community.solid-run.com/t/u-boot-atf-failure-ldsk-21-08-on-clearfog-lx2/316)._