# Troubles booting a Cubox-i4P

**URL:** <https://community.solid-run.com/t/troubles-booting-a-cubox-i4p/1062>\
**Category:** I.MX6\
**Created:** [August 26, 2025, 10:20pm UTC](https://community.solid-run.com/t/troubles-booting-a-cubox-i4p/1062 "2025-08-26T22:20:18Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![neraste](https://avatars.discourse-cdn.com/v4/letter/n/c37758/32.png) [@neraste](https://community.solid-run.com/u/neraste)\
**Post date:** [August 27, 2025, 11:09pm UTC](https://community.solid-run.com/t/troubles-booting-a-cubox-i4p/1062/3 "2025-08-27T23:09:12Z")

</div>

I’ve to check again, but the temperature was around 55-60°C (this summer was quite hot). I cannot tell by touching the Cubox if it’s warmer than usual. I have a throttling daemon which adjusts the CPU frequency with the temperature. I read [another post](https://community.solid-run.com/t/cubox-i4pro-no-boot/143) where the culprit was the power suply, so I’ll try to replace it.

---

_[View the full topic](https://community.solid-run.com/t/troubles-booting-a-cubox-i4p/1062)._