# Trouble finding Humminboard pin layout

**URL:** <https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124>\
**Category:** I.MX6\
**Created:** [April 5, 2026, 7:45am UTC](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124 "2026-04-05T07:45:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Johannes](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@Johannes](https://community.solid-run.com/u/Johannes)\
**Post date:** [April 5, 2026, 7:45am UTC](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124/1 "2026-04-05T07:45:33Z")

</div>

Hello,  
I have a Hummingboard 2 (Edge), with GPIO pin layout like 4 \* 3 + 4 \* 6.  
I can’t seem to find a picture or something with the pin layout, the best thing i found was  
This: [https://solidrun.atlassian.net/wiki/spaces/developer/pages/287343206/HummingBoard+Edge+Gate+GPIOs](https://solidrun.atlassian.net/wiki/spaces/developer/pages/287343206/HummingBoard+Edge+Gate+GPIOs)  
And this: [Hummingboard Edge / Gate — wiringX 7.0 documentation](https://www.wiringx.org/platforms/hummingboard/hummingboardedgegate.html#gpio-mapping)  
But I can’t seem to find an easy to view picture. Can someone help?

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [April 7, 2026, 8:58am UTC](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124/2 "2026-04-07T08:58:07Z")

</div>

We just launched our new documentation site at [https://dev.solid-run.com/](https://dev.solid-run.com/) You can take a look there. Otherwise you can also use the simplified schematics for the board to help out. If you don’t find what you need just ping back here and I will answer your specific question.

---

<div class="post-metadata">

**Author:** ![Johannes](https://avatars.discourse-cdn.com/v4/letter/j/7ba0ec/32.png) [@Johannes](https://community.solid-run.com/u/Johannes)\
**Post date:** [April 7, 2026, 9:11am UTC](https://community.solid-run.com/t/trouble-finding-humminboard-pin-layout/1124/3 "2026-04-07T09:11:04Z")

</div>

Hi, okay thank you!

I found some other mappings that were not likely accurate or i misread them, as with multimeter the 5v, 3,3v and gnd were found in somewhat different places :-).

The map found in your link seemed to match my testing at a first glance, so thanks.