# Totaly silent LX2160
**URL:** https://community.solid-run.com/t/totaly-silent-lx2160/309
**Category:** NXP LX2160
**Created:** [May 6, 2022, 8:50am UTC](https://community.solid-run.com/t/totaly-silent-lx2160/309 "2022-05-06T08:50:18Z")
**Posts on this page:** 3
**Page:** 1
### Author:  [@Nicolas](https://community.solid-run.com/u/Nicolas)
#### Post date: [May 6, 2022, 8:50am UTC](https://community.solid-run.com/t/totaly-silent-lx2160/309/1 "2022-05-06T08:50:18Z")
Hello,
I’ve just ordered an HoneyComb with LX2160. Just put it on an ATX enclosure connect USB cable on console, started picocom on the right tty @115200 and … NOTHING. Ok perhaps BL is on the MMC, tried out 2 differents SD with latest image =\> totaly silent.
The fan is starting full speed then decrease @idle, leds are on.
Tried the STM32 port, get the Bootloader device from STM32 that’s all (it seems that no firmware is supplied on it ?!).
What can I check ?
Regards
Nicolas F.
---
### Author:  [@jnettlet](https://community.solid-run.com/u/jnettlet)
#### Post date: [May 8, 2022, 7:46am UTC](https://community.solid-run.com/t/totaly-silent-lx2160/309/2 "2022-05-08T07:46:27Z")
Have you double checked the dip switches on the CEX7 module are set to boot from the SD-Card? Which images are you flashing to the sd card?
---
### Author:  [@jnettlet](https://community.solid-run.com/u/jnettlet)
#### Post date: [May 11, 2022, 5:41pm UTC](https://community.solid-run.com/t/totaly-silent-lx2160/309/3 "2022-05-11T17:41:10Z")
There was an incorrect patch that was accidentally pushed to the repository. The latest images have this fixed, [SolidRun Images](https://images.solid-run.com/LX2k/lx2160a_build)