Hi, I want to toggle the gpio pin 119 attached in screen shot. But not able to toggle when i see on oscilloscope/multimeter. Can you please correct me if i am wrong? I followed the below steps to toggle it. echo 119 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio119/direction echo 1 > …

What BSP image are you running?

Hi Please see the metioned screen shot for Linux BSP version. And i have followed the steps mentioned in link for yocto Thanks & Regards, Kartheek [Screenshot from 2023-10-10 15-03-43]

and what revision of the carrier are you using? The pin connected to the mikrobus changed between rev 2.3 and rev 2.5 carriers

May i know how to find the rev. I have rev 2.2, 2.3 & 2.5 downloaded from this link . And we are following rev 2.5.

You should be able to check the SKU, but otherwise it is silk screened onto the board underneath where the SOM is mounted.

Unable to find the rev. Attached board underneath image for your refernce. Can you please help me. [MicrosoftTeams-image]

Hi Jnettlet. Sorry for late response. My humming board pulse(imx8mplus) is rev 2.5. Can you please tell how to toggle gpio on mikrobus.

Rev 2.5 has the SAI2_RXD pin connected to SAI3_RXD of the iMX8MP SOM. This pin is also shared with the wm8904 audio so they can’t be used at the same time. To use this pin as a GPIO you need to remove it from the &pinctrl_sai3 group and add it to the &pinctrl_hog group as a GPIO. It should be GPI…

Toggling of GPIO4_IO23 on humming board pulse

NXP i.MX8M Plus

jnettlet October 11, 2023, 10:18am 8

It is on the top of the board in between the SOM connectors. You need to remove the SOM to see it.

Topic		Replies	Views
Configure pin as simple GPIO NXP i.MX8M Plus iMX8M-plus	7	2309	October 13, 2022
Changing pins GPIO4_IO values NXP i.MX8M Plus iMX8M-plus	1	558	May 16, 2021
How to use and setup GPIO (gpiod library) for Hummingboard Mate? NXP i.MX8M Plus	4	523	October 18, 2022
Hummingboard Mate IMX8. Booting it externally NXP i.MX8M Plus iMX8M-plus	0	227	October 10, 2022
Cannot toggle a GPIO pin on the RZV2L SOM Rev1.1 Renesas RZ	0	20	October 2, 2025

Toggling of GPIO4_IO23 on humming board pulse

Related topics