# SPI node not found in Kirkstone image

**URL:** <https://community.solid-run.com/t/spi-node-not-found-in-kirkstone-image/817>\
**Category:** NXP i.MX8M Plus\
**Created:** [February 16, 2024, 4:50am UTC](https://community.solid-run.com/t/spi-node-not-found-in-kirkstone-image/817 "2024-02-16T04:50:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [February 16, 2024, 4:50am UTC](https://community.solid-run.com/t/spi-node-not-found-in-kirkstone-image/817/1 "2024-02-16T04:50:29Z")

</div>

Hi Team,

I am using **humming board pulse & imx8mp-plus SOM**. I have downloaded **kirkstone imag** e from the following [link](https://solid-run-images.sos-de-fra-1.exo.io/IMX8/imx8mp_yocto_kirkstone-5.15.71-2.2.0/20230903-51514eb/imx-hailo-demo-image-imx8mpsolidrun.wic.zst).  
After that i boot the board with kirkstone image. I am unable to find spi node in dev folder. Can i know how to **enable spi node**.

Attached boot log for your reference.

Thank you,  
kartheek  
[kirkStone.log](https://community.solid-run.com/uploads/short-url/jkDSuHp5Lwm7kpMA2BymZiv9JZd.log) (41.7 KB)