# Solidsense N8 compact no CAN interface

**URL:** <https://community.solid-run.com/t/solidsense-n8-compact-no-can-interface/415>\
**Category:** Uncategorized\
**Created:** [August 3, 2022, 8:33am UTC](https://community.solid-run.com/t/solidsense-n8-compact-no-can-interface/415 "2022-08-03T08:33:36Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jfpastrana](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@jfpastrana](https://community.solid-run.com/u/jfpastrana)\
**Post date:** [August 3, 2022, 8:33am UTC](https://community.solid-run.com/t/solidsense-n8-compact-no-can-interface/415/1 "2022-08-03T08:33:36Z")

</div>

Hello,

I am using the Solidsense N8 compact with the default image:

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/solid_run/original/1X/bb1045a6019d06532e6dc158f9605b258c28920b.png)

I cannot follow this guide as I do not have can0 interface: [SolidSense N8 Compact RS485 and CAN bus](https://solidrun.atlassian.net/wiki/spaces/developer/pages/286687233/SolidSense+N8+Compact+RS485+and+CAN+bus)

if I type “ifconfig -a” I can only see eth0, wlan0, lo interfaces.

By default I do not have loaded the CAN kernel modules, However if I do it manually using modprobe:

- modprobe can-raw
- modprobe can-gw
- modprobe can-bcm
- modprobe can
- modprobe can-dev
- modprobe flexcan

How can I bring it up?

Regards