# SolidRun ClearFog CN9130 - Openwrt Boot Error WAN and LAN Ports are not Detected "mvpp2 f2000000.ethernet eth2: could not attach PHY (-22)"

**URL:** <https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138>\
**Category:** Uncategorized\
**Created:** [May 26, 2026, 2:40pm UTC](https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138 "2026-05-26T14:40:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![pavankumarv-kitforge](https://avatars.discourse-cdn.com/v4/letter/p/e47c2d/32.png) [@pavankumarv-kitforge](https://community.solid-run.com/u/pavankumarv-kitforge)\
**Post date:** [May 26, 2026, 2:40pm UTC](https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138/1 "2026-05-26T14:40:58Z")

</div>

Hey Team,

I have a SolidRun ClearFog CN9130 hardware.

I am trying to run openwrt on the hardware; however, I have some roadblocks.

When the Openwrt OS is booting I see the WAN port is not detected and throwing error.

Logs

```auto
   95.624907] mvpp2 f2000000.ethernet eth0: configuring for inband/10gbase-r link mode
[95.633534] br-lan: port 1(eth0) entered blocking state
[95.638828] br-lan: port 1(eth0) entered disabled state
[95.644095] mvpp2 f2000000.ethernet eth0: entered allmulticast mode
[95.650599] mvpp2 f2000000.ethernet eth0: entered promiscuous mode
[95.663453] mvpp2 f2000000.ethernet eth1: configuring for fixed/sgmii link mode
[95.671372] mvpp2 f2000000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[95.679304] br-lan: port 2(eth1) entered blocking state
[95.684559] br-lan: port 2(eth1) entered disabled state
[95.689856] mvpp2 f2000000.ethernet eth1: entered allmulticast mode
[95.696396] mvpp2 f2000000.ethernet eth1: entered promiscuous mode
[95.702706] br-lan: port 2(eth1) entered blocking state
[95.707984] br-lan: port 2(eth1) entered forwarding state
[95.716403] mvpp2 f2000000.ethernet eth2: validation of rgmii-id with support 00,00000000,00000000,00006280 and advertisement 00,00000000,00000000,00006280 failed: -EINVAL
[95.731924] mvpp2 f2000000.ethernet eth2: could not attach PHY (-22)

```

It will be helpful if there’s any direction.

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [May 26, 2026, 5:14pm UTC](https://community.solid-run.com/t/solidrun-clearfog-cn9130-openwrt-boot-error-wan-and-lan-ports-are-not-detected-mvpp2-f2000000-ethernet-eth2-could-not-attach-phy-22/1138/2 "2026-05-26T17:14:39Z")

</div>

What OpenWRT release are you running? I will take a look at it, but currently the OpenWRT release is community maintained.