# Serial port is 115200 8N1 on USB-serial-TTL

**URL:** <https://community.solid-run.com/t/serial-port-is-115200-8n1-on-usb-serial-ttl/242>\
**Category:** Uncategorized\
**Created:** [February 14, 2022, 11:45am UTC](https://community.solid-run.com/t/serial-port-is-115200-8n1-on-usb-serial-ttl/242 "2022-02-14T11:45:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![stappers](https://avatars.discourse-cdn.com/v4/letter/s/df705f/32.png) [@stappers](https://community.solid-run.com/u/stappers)\
**Post date:** [February 14, 2022, 11:45am UTC](https://community.solid-run.com/t/serial-port-is-115200-8n1-on-usb-serial-ttl/242/1 "2022-02-14T11:45:57Z")

</div>

Hi,

Here some suggestions on improving [https://solidrun.atlassian.net/wiki/spaces/developer/pages/287801409/Serial+Connection](https://solidrun.atlassian.net/wiki/spaces/developer/pages/287801409/Serial+Connection)

- Change various _this page_ into _this section_ because there are several sections on that single one webpage.
- Add a start section that tells about USB-serial-TTL ( FTDI-chip ) that the baudrate is 115200, 8 bits, no parity, one stop bit.
- Add a next section that introduces the MS Windows section, the Linux section and Apple Mac section.

Summarized: Start with what is generic for all host systems, then go into detail. And don’t call a section a page 😉

Regards  
Geert Stappers

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [February 14, 2022, 1:40pm UTC](https://community.solid-run.com/t/serial-port-is-115200-8n1-on-usb-serial-ttl/242/2 "2022-02-14T13:40:54Z")

</div>

As per my other response. We have just recently switched documentation platforms and not all legacy articles have been re-written to reflect the new platforms layout. This is being worked on.