# RT linux kernel download

**URL:** <https://community.solid-run.com/t/rt-linux-kernel-download/294>\
**Category:** NXP LX2160\
**Created:** [April 20, 2022, 7:39am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294 "2022-04-20T07:39:05Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ranga](https://avatars.discourse-cdn.com/v4/letter/r/6de8d8/32.png) [@Ranga](https://community.solid-run.com/u/Ranga)\
**Post date:** [April 20, 2022, 7:39am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/1 "2022-04-20T07:39:05Z")

</div>

Hello team,  
I tired to download the RT linux with the below modification for tag added

Cloing [https://source.codeaurora.org/external/qoriq/qoriq-components/linux](https://source.codeaurora.org/external/qoriq/qoriq-components/linux) release LSDK-21.08

# Release LSDK-21.08

```
            if ["x$i" == "xlinux"] && ["x$RELEASE" == "xLSDK-21.08"]; then
                    CHECKOUT=LSDK-21.08-V5.4-RT

```

Below error is observed in built.  
Cloning into ‘linux’…  
fatal: Remote branch LSDK-21.08-V5.4-RT not found in upstream origin

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [April 20, 2022, 8:56am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/2 "2022-04-20T08:56:37Z")

</div>

That is correct. You need to check the tags available here. [qoriq-components/linux - Linux Tree for QorIQ support](https://source.codeaurora.org/external/qoriq/qoriq-components/linux/refs/tags)

---

<div class="post-metadata">

**Author:** ![Ranga](https://avatars.discourse-cdn.com/v4/letter/r/6de8d8/32.png) [@Ranga](https://community.solid-run.com/u/Ranga)\
**Post date:** [April 20, 2022, 10:28am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/3 "2022-04-20T10:28:36Z")

</div>

Thanks.  
also for for the board do we have specific switch setting to make the board reboot from remote power [ON OFF]- incase there is board freeze or hang issue.

regards,  
ranga

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [April 20, 2022, 10:59am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/4 "2022-04-20T10:59:48Z")

</div>

I don’t fully understand what you mean. Do you mean if the power supply is powered on and off you want to board to automatically power on?

---

<div class="post-metadata">

**Author:** ![Ranga](https://avatars.discourse-cdn.com/v4/letter/r/6de8d8/32.png) [@Ranga](https://community.solid-run.com/u/Ranga)\
**Post date:** [April 20, 2022, 11:46am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/5 "2022-04-20T11:46:10Z")

</div>

yes correct in NXP 2160 ARDB board there is default switch setting to make the board to auto power on when power is made off and on.

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [April 20, 2022, 11:50am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/6 "2022-04-20T11:50:47Z")

</div>

auto power on can be enabled by populating header J39 next to the ATX power connector and jumpering it. This holds the ATX power on signal to ground so the power supply will always provide power to the board when it is powered on.

---

<div class="post-metadata">

**Author:** ![Ranga](https://avatars.discourse-cdn.com/v4/letter/r/6de8d8/32.png) [@Ranga](https://community.solid-run.com/u/Ranga)\
**Post date:** [April 22, 2022, 5:56am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/7 "2022-04-22T05:56:17Z")

</div>

Thanks,  
could you provide which all pins has to shorted on J39 connetor… if any image or doc will be helpful

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [April 22, 2022, 6:30am UTC](https://community.solid-run.com/t/rt-linux-kernel-download/294/8 "2022-04-22T06:30:57Z")

</div>

j39 is only a 2 pin header. You just populate it with a header and can then jumper it to force the PSU to always power on.