# Problems with their Solutions

**URL:** <https://community.solid-run.com/t/problems-with-their-solutions/121>\
**Category:** NXP LX2160\
**Created:** [July 23, 2021, 11:44am UTC](https://community.solid-run.com/t/problems-with-their-solutions/121 "2021-07-23T11:44:28Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![KarlW](https://avatars.discourse-cdn.com/v4/letter/k/ec9cab/32.png) [@KarlW](https://community.solid-run.com/u/KarlW)\
**Post date:** [August 20, 2021, 2:34pm UTC](https://community.solid-run.com/t/problems-with-their-solutions/121/21 "2021-08-20T14:34:28Z")

</div>

Thanks for the clarification. I measured the resistance between pin 4 of the front panel header and the ground pin of a fan header and the resistance is 0Ω. So that the ground pin of the PLED is not connected to anything, doesn’t seem to be correct, at least on my board.

Since I haven’t had any problems with the power LED of the Chenbro case and other mainboards, I thought it was a problem with the Clearfog board. But they’re right, the Intel spec says 5V. Sorry for that.

Since I didn’t like the blue LEDs on the case anyway, it was a good thing that I now have a reason to change them. 😉

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [August 21, 2021, 11:18am UTC](https://community.solid-run.com/t/problems-with-their-solutions/121/22 "2021-08-21T11:18:50Z")

</div>

I look forward to pictures when you are done 👍

[Previous page](https://community.solid-run.com/t/problems-with-their-solutions/121.md?page=1)