# Power Over Ethernet Header

**URL:** <https://community.solid-run.com/t/power-over-ethernet-header/371>\
**Category:** OCTEON CN9130\
**Created:** [July 7, 2022, 1:30pm UTC](https://community.solid-run.com/t/power-over-ethernet-header/371 "2022-07-07T13:30:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![lblyth](https://avatars.discourse-cdn.com/v4/letter/l/b3f665/32.png) [@lblyth](https://community.solid-run.com/u/lblyth)\
**Post date:** [July 7, 2022, 1:30pm UTC](https://community.solid-run.com/t/power-over-ethernet-header/371/1 "2022-07-07T13:30:04Z")

</div>

What part do I need to get to use the POE header on the Clearfog CN9130 Pro?  
What standards (poe+ or poe++) are available ?  
What size power supply should I order?

Thank you

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [July 7, 2022, 3:24pm UTC](https://community.solid-run.com/t/power-over-ethernet-header/371/2 "2022-07-07T15:24:07Z")

</div>

@Alon will be able to help answer those questions.

---

<div class="post-metadata">

**Author:** ![Alon](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@Alon](https://community.solid-run.com/u/Alon)\
**Post date:** [July 7, 2022, 4:33pm UTC](https://community.solid-run.com/t/power-over-ethernet-header/371/3 "2022-07-07T16:33:24Z")

</div>

unfortunatly, there is no standard PoE module to be used.  
when designing the Clearfog Pro, the intention was to build a custom PoE module, but it was never built.