# OpenWRT for SolidRun HoneyComb LX2

**URL:** <https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570>\
**Category:** NXP LX2160\
**Tags:** NXP-LX2160\
**Created:** [February 7, 2023, 8:05am UTC](https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570 "2023-02-07T08:05:36Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mefer](https://avatars.discourse-cdn.com/v4/letter/m/6a8cbe/32.png) [@mefer](https://community.solid-run.com/u/mefer)\
**Post date:** [February 7, 2023, 8:05am UTC](https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570/1 "2023-02-07T08:05:36Z")

</div>

How to use the OpenWRT distribution on a HoneyComb LX2 device. Is there an instruction for assembling the installation distribution or how to install it on the device?

---

<div class="post-metadata">

**Author:** ![imperador](https://avatars.discourse-cdn.com/v4/letter/i/ce73a5/32.png) [@imperador](https://community.solid-run.com/u/imperador)\
**Post date:** [September 30, 2024, 8:31pm UTC](https://community.solid-run.com/t/openwrt-for-solidrun-honeycomb-lx2/570/2 "2024-09-30T20:31:35Z")

</div>

Late response, but have you tried the new [ARMSR Target](https://downloads.openwrt.org/snapshots/targets/armsr/armv8/)? You might be able to boot it up through UEFI. It worked with all SR devices I tried so far