# Oe\_runmake failed

**URL:** <https://community.solid-run.com/t/oe-runmake-failed/844>\
**Category:** NXP i.MX8M Plus\
**Created:** [May 29, 2024, 2:50pm UTC](https://community.solid-run.com/t/oe-runmake-failed/844 "2024-05-29T14:50:17Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [May 29, 2024, 2:50pm UTC](https://community.solid-run.com/t/oe-runmake-failed/844/1 "2024-05-29T14:50:17Z")

</div>

Hi Team,  
I am following [GitHub - SolidRun/meta-solidrun-arm-imx8](https://github.com/SolidRun/meta-solidrun-arm-imx8) link to create yocto build in my linux machine. For DISTRO i am using below command.  
_DISTRO=fsl-imx-xwayland MACHINE=imx8mpsolidrun source imx-setup-release.sh -b build-xwayland-imx8mpsolidrun_

But getting error as mentioned in image. May i know how to solve that issue.

Thank you,  
Kartheek

 ![image](https://europe1.discourse-cdn.com/flex005/uploads/solid_run/original/1X/e69b6a63fa85c54599cf08b86e86ca2e715fa169.png)

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [May 30, 2024, 4:29am UTC](https://community.solid-run.com/t/oe-runmake-failed/844/2 "2024-05-30T04:29:50Z")

</div>

It looks like the latest changes pushed to support the iMX8M Nano platforms is causing a conflict for the iMX8M Plus builds. I will look into it and push a fix later in the day.

---

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [May 30, 2024, 3:26pm UTC](https://community.solid-run.com/t/oe-runmake-failed/844/3 "2024-05-30T15:26:09Z")

</div>

Hi jnettlet,

Can you please tell is the fix done? Still facing the same issue.

Thank you,  
kartheek

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [May 30, 2024, 5:41pm UTC](https://community.solid-run.com/t/oe-runmake-failed/844/4 "2024-05-30T17:41:25Z")

</div>

I wasn’t able to replicate the problem locally. Could you post your bblayers and local.conf files for me to use?

---

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [May 31, 2024, 3:57am UTC](https://community.solid-run.com/t/oe-runmake-failed/844/5 "2024-05-31T03:57:03Z")

</div>

PFA bblayers.conf and local.conf for your reference.

FYI. Used _ **bitbake core-image-minimal** _ cmd which gives the error as mentioned in the previous post.

[bblayers.conf.txt](https://community.solid-run.com/uploads/short-url/mgSMzC1qMU1TQJ0z1RiVMK2JAY2.txt) (1.4 KB)  
[local.conf.txt](https://community.solid-run.com/uploads/short-url/uF3lGpqLVcvgpD8oBqn0DeIZaA3.txt) (732 Bytes)

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [June 3, 2024, 3:18am UTC](https://community.solid-run.com/t/oe-runmake-failed/844/6 "2024-06-03T03:18:24Z")

</div>

The fix has been pushed. If you pull our meta-layer again everything should build properly.

---

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [June 3, 2024, 11:04am UTC](https://community.solid-run.com/t/oe-runmake-failed/844/7 "2024-06-03T11:04:51Z")

</div>

Hi Jnettlet,

The build is working fine now. Thanks for your help.

Regards,  
Kartheek