# NVMe storage on CN9132

**URL:** <https://community.solid-run.com/t/nvme-storage-on-cn9132/616>\
**Category:** OCTEON CN9130\
**Created:** [April 5, 2023, 1:12am UTC](https://community.solid-run.com/t/nvme-storage-on-cn9132/616 "2023-04-05T01:12:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![justizin](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/justizin/32/193_2.png) [@justizin](https://community.solid-run.com/u/justizin)\
**Post date:** [April 5, 2023, 1:12am UTC](https://community.solid-run.com/t/nvme-storage-on-cn9132/616/1 "2023-04-05T01:12:42Z")

</div>

Howdy, folks!

I have a shiny CN9132 which sports _several_ M.2 PCIe ports. I see in [this other post](https://community.solid-run.com/t/clearfog-pro-cn9130-cant-recognize-sata-nvme-m-2/575) that another user had success with SATA PCIe M.2 drives, concluding abruptly that NVMe was, “the wrong” thing. Since both SATA and NVMe are protocols which run over PCIe, it doesn’t seem like this should be limited in HW.

I did see that NVME support is built into the default kernel as a module, which I ensured was loaded, but still don’t see anything.

Shouldn’t I expect to see this as a PCI device in `lspci`, even if it’s not recognized as a storage device?