# Macchiatobin DoubleShot: Pre-built UEFI images?
**URL:** https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972
**Category:** General Discussion
**Created:** [January 31, 2025, 5:48am UTC](https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972 "2025-01-31T05:48:31Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@Raion](https://community.solid-run.com/u/Raion)
#### Post date: [January 31, 2025, 5:48am UTC](https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972/1 "2025-01-31T05:48:31Z")
I have not been able to find prebuilts for this, as they have been removed from [images.solid-run.com](http://images.solid-run.com)
Can someone provide me with a prebuild? I have had zero success attempting to build one.
---
### Author:  [@jnettlet](https://community.solid-run.com/u/jnettlet)
#### Post date: [January 31, 2025, 8:54am UTC](https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972/2 "2025-01-31T08:54:44Z")
Semihalf has mainly provided the SystemReady ES firmware images for the McBin lineup. Their prebuilt firmware’s are available on their github, [Home · Semihalf/edk2-platforms Wiki · GitHub](https://github.com/Semihalf/edk2-platforms/wiki)
All their code is in mainline repositories, I will check what is wrong with building the current source.
---
### Author:  [@Raion](https://community.solid-run.com/u/Raion)
#### Post date: [January 31, 2025, 6:38pm UTC](https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972/3 "2025-01-31T18:38:33Z")
Don’t get it mixed up, I didn’t go into detail in building the image because it was purely because it depends on old python and gcc-cross builds that arent offered on my distro. I ran into toolchain issues because it requires python 3.8 or older, GCC5 etc. These are no longer packaged with my distro and I didn’t wanna manually build it.
I’m trying the image suggested now.
---
### Author:  [@Raion](https://community.solid-run.com/u/Raion)
#### Post date: [January 31, 2025, 6:51pm UTC](https://community.solid-run.com/t/macchiatobin-doubleshot-pre-built-uefi-images/972/4 "2025-01-31T18:51:41Z")
When I booted into uboot using an SD card image I was given, I used loadx and sx to send the image over. When I set the jumpers to SPI, this happens:
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 02. error = 0x018
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 03. error = 0x018
BootROM - 2.03
Warning: IHB ID assinment ACK not done 0x00020002
h 1 (0x32)
Error: no valid header till end of media
Error: Failed boot attempt 04. error = 0x018