# M10 gnss no fix

**URL:** <https://community.solid-run.com/t/m10-gnss-no-fix/1118>\
**Category:** NXP  I.MX 8XLITE\
**Created:** [March 20, 2026, 12:19am UTC](https://community.solid-run.com/t/m10-gnss-no-fix/1118 "2026-03-20T00:19:55Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![dylan](https://avatars.discourse-cdn.com/v4/letter/d/e95f7d/32.png) [@dylan](https://community.solid-run.com/u/dylan)\
**Post date:** [March 20, 2026, 12:19am UTC](https://community.solid-run.com/t/m10-gnss-no-fix/1118/1 "2026-03-20T00:19:55Z")

</div>

Hi there,

I seem to be unable to get a fix on the ublox m10 gnss. The antenna is connected to J34 on the Hummingboard carrier. I have used cgps to check the fix.

I have the v2x evaluation kit setup.

Here is some output:

2026-03-20 00:19:27: {“class”:“VERSION”,“release”:“3.22”,“rev”:“3.22”,“proto\_major”:3,“proto\_minor”:14}  
2026-03-20 00:19:27: {“class”:“DEVICES”,“devices”:[{“class”:“DEVICE”,“path”:“/dev/gnss0”,“driver”:“u-blox”,“subtype”:“SW ROM SPG 5.10 (7b202e),HW 000A0000”,“subtype1”:“FWVER=SPG 5.10,PROTVER=34.10,MOD=MIA-M10Q,GPS;GLO;GAL;BDS,SBAS;QZSS”,“activated”:“2026-03-20T00:19:27.775Z”,“flags”:1,“native”:1,“bps”:38400,“parity”:“N”,“stopbits”:0,“cycle”:1.00,“mincycle”:0.02}]}  
2026-03-20 00:19:27: {“class”:“WATCH”,“enable”:true,“json”:true,“nmea”:false,“raw”:0,“scaled”:false,“timing”:false,“split24”:false,“pps”:false}  
2026-03-20 00:19:28: {“class”:“TPV”,“device”:“/dev/gnss0”,“mode”:1}  
2026-03-20 00:19:28: {“class”:“SKY”,“device”:“/dev/gnss0”,“time”:“2019-04-07T00:41:34.000Z”,“vdop”:99.99,“tdop”:99.99,“hdop”:99.99,“gdop”:99.99,“pdop”:99.99,“nSat”:0,“uSat”:0}  
2026-03-20 00:19:29: {“class”:“TPV”,“device”:“/dev/gnss0”,“mode”:1}  
2026-03-20 00:19:29: {“class”:“SKY”,“device”:“/dev/gnss0”,“time”:“2019-04-07T00:41:35.000Z”,“vdop”:99.99,“tdop”:99.99,“hdop”:99.99,“gdop”:99.99,“pdop”:99.99,“nSat”:0,“uSat”:0}  
2026-03-20 00:19:30: {“class”:“TPV”,“device”:“/dev/gnss0”,“mode”:1}  
2026-03-20 00:19:30: {“class”:“SKY”,“device”:“/dev/gnss0”,“time”:“2019-04-07T00:41:36.000Z”,“vdop”:99.99,“tdop”:99.99,“hdop”:99.99,“gdop”:99.99,“pdop”:99.99,“nSat”:0,“uSat”:0}  
2026-03-20 00:19:31: {“class”:“TPV”,“device”:“/dev/gnss0”,“mode”:1}  
2026-03-20 00:19:31: {“class”:“SKY”,“device”:“/dev/gnss0”,“time”:“2019-04-07T00:41:37.000Z”,“vdop”:99.99,“tdop”:99.99,“hdop”:99.99,“gdop”:99.99,“pdop”:99.99,“nSat”:0,“uSat”:0}

The GNSS antenna is indoors but with visible view of the sky. I have used this exact setup with another ublox M9 many times before so really don’t think that’s the issue here.

---

<div class="post-metadata">

**Author:** ![dylan](https://avatars.discourse-cdn.com/v4/letter/d/e95f7d/32.png) [@dylan](https://community.solid-run.com/u/dylan)\
**Post date:** [March 24, 2026, 11:55pm UTC](https://community.solid-run.com/t/m10-gnss-no-fix/1118/2 "2026-03-24T23:55:54Z")

</div>

I have also tried a passive antenna but still cannot get a fix

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [March 25, 2026, 12:01pm UTC](https://community.solid-run.com/t/m10-gnss-no-fix/1118/3 "2026-03-25T12:01:31Z")

</div>

is it possible for you to upgrade gpsd to version 3.25? 3.23 and newer versions include small fixes and updates for the ublox m10 module.