# LX2160 COM Express target initialization file

**URL:** <https://community.solid-run.com/t/lx2160-com-express-target-initialization-file/35>\
**Category:** NXP LX2160\
**Tags:** NXP-LX2160\
**Created:** [April 29, 2021, 12:45pm UTC](https://community.solid-run.com/t/lx2160-com-express-target-initialization-file/35 "2021-04-29T12:45:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![williamdods](https://avatars.discourse-cdn.com/v4/letter/w/aeb1de/32.png) [@williamdods](https://community.solid-run.com/u/williamdods)\
**Post date:** [April 29, 2021, 12:45pm UTC](https://community.solid-run.com/t/lx2160-com-express-target-initialization-file/35/1 "2021-04-29T12:45:24Z")

</div>

Hello!! I use LX2160 COM Express on my board. My board has no MMC card slot so i cant make it work now. i want to use TAP and codewarior to flash u-boot to spi , but target initialization script fail. I only have it for NXP LX2160A QDS and RDB boards. Could you provide target initialization file for your board, please ?

---

<div class="post-metadata">

**Author:** ![YazanShhadySR](https://avatars.discourse-cdn.com/v4/letter/y/a6a055/32.png) [@YazanShhadySR](https://community.solid-run.com/u/YazanShhadySR)\
**Post date:** [April 29, 2021, 12:46pm UTC](https://community.solid-run.com/t/lx2160-com-express-target-initialization-file/35/2 "2021-04-29T12:46:45Z")

</div>

Hi William,

You can download a pre-built snapshot image from [SolidRun Images](https://images.solid-run.com/LX2k/lx2160a_build)

Those images are built with the suffix of the commit ID of the [GitHub - SolidRun/lx2160a\_build: Scripts to build basic images for LX2160A COM express type 7 modules](https://github.com/SolidRun/lx2160a_build) project that you can clone and build by yourself.

Note:  
The prebuilt images are configured for SO-DIMM DDR4 with speed of 3200, 2900, 2600 and 2400 Mtps (with or without ECC support),. Images that have the prefix lx2160a\_xspi are intended to be flashed into SPI and recommended for later use after being booted from micro SD

I suggest to take a look on this developer page - [HoneyComb / ClearFog CX Installation and Tips | SolidRun](https://developer.solid-run.com/knowledge-base/honeycomb-clearfog-cx-installation-and-tips/#introduction)  
it’s including some installation tips with our Carrier board ClearFog\_Cx/HoneyComb & LX2160 CEX7 COM

To take the U-Boot part of the SPI:

Take 4MByte out of those 64MByte - [https://solid-run-images.sos-de-fra-1.exo.io/LX2k/lx2160a\_build/lx2160acex7\_xspi\_2000\_700\_2400\_8\_5\_2-2fff64e.img.xz](https://solid-run-images.sos-de-fra-1.exo.io/LX2k/lx2160a_build/lx2160acex7_xspi_2000_700_2400_8_5_2-2fff64e.img.xz)

Let me know if you have any problems with that.

FYI,  
If you order a quantity of cards (LX2160 Cex7 COM) you can ask Solidrun to send you the units with the appropriate software you will need on SPI/eMMC (we can do this at the factory during the tests)

Best Regards,  
Yazan.