# Linux driver changes when building lx2160a\_build with docker **URL:** \ **Category:** NXP LX2160\ **Tags:** NXP-LX2160\ **Created:** [July 24, 2024, 9:29pm UTC](https://community.solid-run.com/t/linux-driver-changes-when-building-lx2160a-build-with-docker/873 "2024-07-24T21:29:41Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![Hieudon](https://avatars.discourse-cdn.com/v4/letter/h/8c91f0/32.png) [@Hieudon](https://community.solid-run.com/u/Hieudon)\ **Post date:** [July 24, 2024, 9:29pm UTC](https://community.solid-run.com/t/linux-driver-changes-when-building-lx2160a-build-with-docker/873/1 "2024-07-24T21:29:41Z")
Hello, I have been using these 2 commands to build the lx2160a\_build image with docker. **docker build -t lx2160a\_build docker** **docker run --rm -i -t -v “$PWD”:/work lx2160a\_build -u $(id -u) -g $(id -g)** I was able to see u-boot changes I made but the changes I made to the Linux drivers are not seen. I have tried adding pr\_info statements and modify existing pr\_info statements that I see in dmesg and boot log but I don’t see the changes I made. Is there something that I am missing when building lx2160a\_build? Do I have to compile the Linux drivers before running the docker run command? Sorry I don’t have much experience with docker. Thanks. ---
**Author:** ![Hieudon](https://avatars.discourse-cdn.com/v4/letter/h/8c91f0/32.png) [@Hieudon](https://community.solid-run.com/u/Hieudon)\ **Post date:** [July 26, 2024, 1:50am UTC](https://community.solid-run.com/t/linux-driver-changes-when-building-lx2160a-build-with-docker/873/2 "2024-07-26T01:50:01Z")
It looks like the way the Docker is configured, the Linux driver code can’t be modified. Can someone help me confirm this? If not, is there a way to modify the scripts or Dockerfile to allow changes made to the build/linux/drivers code appeared in the final image?