# Installing docker on ClearFog CX LX2 fails **URL:** \ **Category:** NXP LX2160\ **Created:** [May 21, 2022, 3:37am UTC](https://community.solid-run.com/t/installing-docker-on-clearfog-cx-lx2-fails/330 "2022-05-21T03:37:52Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![PacMan](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@PacMan](https://community.solid-run.com/u/PacMan)\ **Post date:** [May 21, 2022, 3:37am UTC](https://community.solid-run.com/t/installing-docker-on-clearfog-cx-lx2-fails/330/1 "2022-05-21T03:37:52Z")
I’m attempting to install docker on ‘ddab3ad’ (tried ‘bc46e34’ too), files download, but docker fails to start. Installation recipe: > **Installation recipe used (as recommended on docs.docker.com)** > > ```auto > apt install -y ca-certificates curl gnupg lsb-release > curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg > > echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null > > apt install -y docker-ce docker-ce-cli containerd.io docker-compose-plugin > > ``` > **Installation log** > > ```auto > # apt install docker-ce docker-ce-cli containerd.io docker-compose-plugin > Reading package lists... Done > Building dependency tree > Reading state information... Done > The following packages were automatically installed and are no longer required: > bridge-utils netcat netcat-openbsd ubuntu-fan > Use 'sudo apt autoremove' to remove them. > The following additional packages will be installed: > dbus-user-session docker-ce-rootless-extras libltdl7 slirp4netns > Suggested packages: > cgroupfs-mount | cgroup-lite > The following packages will be REMOVED: > containerd runc > The following NEW packages will be installed: > containerd.io dbus-user-session docker-ce docker-ce-cli docker-ce-rootless-extras > docker-compose-plugin libltdl7 slirp4netns > 0 upgraded, 8 newly installed, 2 to remove and 0 not upgraded. > Need to get 83.4 MB of archives. > After this operation, 242 MB of additional disk space will be used. > Do you want to continue? [Y/n] y > Get:1 http://ports.ubuntu.com/ubuntu-ports focal-updates/main arm64 dbus-user-session arm64 1.12.16-2ubuntu2.2 [9416 B] > Get:2 http://ports.ubuntu.com/ubuntu-ports focal/main arm64 libltdl7 arm64 2.4.6-14 [37.5 kB] > Get:3 http://ports.ubuntu.com/ubuntu-ports focal/universe arm64 slirp4netns arm64 0.4.3-1 [69.2 kB] > Get:4 https://download.docker.com/linux/ubuntu focal/stable arm64 containerd.io arm64 1.6.4-1 [20.8 MB] > Get:5 https://download.docker.com/linux/ubuntu focal/stable arm64 docker-ce-cli arm64 5:20.10.16~3-0~ubuntu-focal [36.1 MB] > Get:6 https://download.docker.com/linux/ubuntu focal/stable arm64 docker-ce arm64 5:20.10.16~3-0~ubuntu-focal [13.5 MB] > Get:7 https://download.docker.com/linux/ubuntu focal/stable arm64 docker-ce-rootless-extras arm64 5:20.10.16~3-0~ubuntu-focal [7289 kB] > Get:8 https://download.docker.com/linux/ubuntu focal/stable arm64 docker-compose-plugin arm64 2.5.0~ubuntu-focal [5608 kB] > Fetched 83.4 MB in 4s (21.5 MB/s) > debconf: unable to initialize frontend: Dialog > debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76, <> line 8.) > debconf: falling back to frontend: Readline > (Reading database ... 11987 files and directories currently installed.) > Removing containerd (1.5.9-0ubuntu1~20.04.4) ... > Removing runc (1.1.0-0ubuntu1~20.04.1) ... > Selecting previously unselected package containerd.io. > (Reading database ... 11931 files and directories currently installed.) > Preparing to unpack .../0-containerd.io_1.6.4-1_arm64.deb ... > Unpacking containerd.io (1.6.4-1) ... > Selecting previously unselected package dbus-user-session. > Preparing to unpack .../1-dbus-user-session_1.12.16-2ubuntu2.2_arm64.deb ... > Unpacking dbus-user-session (1.12.16-2ubuntu2.2) ... > Selecting previously unselected package docker-ce-cli. > Preparing to unpack .../2-docker-ce-cli_5%3a20.10.16~3-0~ubuntu-focal_arm64.deb ... > Unpacking docker-ce-cli (5:20.10.16~3-0~ubuntu-focal) ... > Selecting previously unselected package docker-ce. > Preparing to unpack .../3-docker-ce_5%3a20.10.16~3-0~ubuntu-focal_arm64.deb ... > Unpacking docker-ce (5:20.10.16~3-0~ubuntu-focal) ... > Selecting previously unselected package docker-ce-rootless-extras. > Preparing to unpack .../4-docker-ce-rootless-extras_5%3a20.10.16~3-0~ubuntu-focal_arm64.deb ... > Unpacking docker-ce-rootless-extras (5:20.10.16~3-0~ubuntu-focal) ... > Selecting previously unselected package docker-compose-plugin. > Preparing to unpack .../5-docker-compose-plugin_2.5.0~ubuntu-focal_arm64.deb ... > Unpacking docker-compose-plugin (2.5.0~ubuntu-focal) ... > Selecting previously unselected package libltdl7:arm64. > Preparing to unpack .../6-libltdl7_2.4.6-14_arm64.deb ... > Unpacking libltdl7:arm64 (2.4.6-14) ... > Selecting previously unselected package slirp4netns. > Preparing to unpack .../7-slirp4netns_0.4.3-1_arm64.deb ... > Unpacking slirp4netns (0.4.3-1) ... > Setting up slirp4netns (0.4.3-1) ... > Setting up dbus-user-session (1.12.16-2ubuntu2.2) ... > Setting up containerd.io (1.6.4-1) ... > Setting up docker-compose-plugin (2.5.0~ubuntu-focal) ... > Setting up libltdl7:arm64 (2.4.6-14) ... > Setting up docker-ce-cli (5:20.10.16~3-0~ubuntu-focal) ... > Setting up docker-ce-rootless-extras (5:20.10.16~3-0~ubuntu-focal) ... > Setting up docker-ce (5:20.10.16~3-0~ubuntu-focal) ... > Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. > Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. > Job for docker.service failed because the control process exited with error code. > See "systemctl status docker.service" and "journalctl -xe" for details. > invoke-rc.d: initscript docker, action "start" failed. > ● docker.service - Docker Application Container Engine > Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled) > Active: activating (auto-restart) (Result: exit-code) since Sat 2022-05-21 02:23:23 UTC; 17ms ago > TriggeredBy: ● docker.socket > Docs: https://docs.docker.com > Process: 2685 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1/FAILURE) > Main PID: 2685 (code=exited, status=1/FAILURE) > dpkg: error processing package docker-ce (--configure): > installed docker-ce package post-installation script subprocess returned error exit status 1 > Processing triggers for systemd (245.4-4ubuntu3.17) ... > Processing triggers for libc-bin (2.31-0ubuntu9.9) ... > Errors were encountered while processing: > docker-ce > E: Sub-process /usr/bin/dpkg returned an error code (1) > > ``` > **Snippets from journalctl -xe** > > ```auto > May 21 02:23:22 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:22.786935075Z" level=warning msg="Your kernel does not support CPU CFS scheduler" > May 21 02:23:22 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:22.787008312Z" level=warning msg="Your kernel does not support CPU realtime scheduler" > May 21 02:23:22 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:22.787046271Z" level=warning msg="Your kernel does not support cgroup blkio weight" > May 21 02:23:22 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:22.787083229Z" level=warning msg="Your kernel does not support cgroup blkio weight_device" > ... > May 21 02:23:22 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:22.787576332Z" level=info msg="Loading containers: start." > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.195552998Z" level=error msg="could not get initial namespace: no such file or directory" > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.199793326Z" level=error msg="failed to set to initial namespace, readlink /proc/2685/task/2688/ns/net: no such file or directory, initns fd -1: bad file descriptor" > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.200203671Z" level=info msg="Default bridge (docker0) is assigned with an IP address 172.17.0.0/16. Daemon option --bip can be used to set a preferred IP address" > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.200547179Z" level=error msg="failed to set to initial namespace, readlink /proc/2685/task/2688/ns/net: no such file or directory, initns fd -1: bad file descriptor" > ... > May 21 02:23:23 cx-lx2 NetworkManager[1406]: [1653099803.2035] manager: (docker0): new Bridge device (/org/freedesktop/NetworkManager/Devices/8) > May 21 02:23:23 cx-lx2 systemd-udevd[2762]: Using default interface naming scheme 'v245'. > May 21 02:23:23 cx-lx2 systemd-udevd[2762]: ethtool: autonegotiation is unset or enabled, the speed and duplex are not writable. > ... > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.257519213Z" level=info msg="stopping event stream following graceful shutdown" error="" module=libcontainerd namespace=moby > May 21 02:23:23 cx-lx2 dockerd[2685]: failed to start daemon: Error initializing network controller: Error creating default "bridge" network: Failed to program NAT chain: Failed to inject DOCKER in PREROUTING chain: iptables failed: iptables --wait -t nat -A PREROUTING -m addrtype --dst-type LOCAL -j DOCKER: iptables v1.8.4 (legacy): Couldn't load match `addrtype':No such file or directory > May 21 02:23:23 cx-lx2 dockerd[2685]: Try `iptables -h' or 'iptables --help' for more information. > ... > May 21 02:23:23 cx-lx2 dockerd[2685]: (exit status 2) > May 21 02:23:23 cx-lx2 dockerd[2685]: time="2022-05-21T02:23:23.258394901Z" level=info msg="stopping event stream following graceful shutdown" error="context canceled" module=libcontainerd namespace=plugins.moby > May 21 02:23:23 cx-lx2 systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE > -- Subject: Unit process exited > > ``` The error … `Error creating default "bridge" network: Failed to program NAT chain: Failed to inject DOCKER in PREROUTING chain: iptables failed` … may be significant, but there are other messages, such as the warnings beginning with ‘Your kernel does not support …’ that may be the root of the problem. Note: the ‘docker0’ interface seem to be created successfully. I’ve searched the net and found ‘similar’ problems, but the solutions suggested does not work for me. [Example attempt on solving the issue](https://forums.docker.com/t/37444). Raspberry Pi solutions won’t work either. -If anyone has a clue (or can successfully run docker on the CX or Honeycomb), please let me know. ---
**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\ **Post date:** [May 22, 2022, 5:31am UTC](https://community.solid-run.com/t/installing-docker-on-clearfog-cx-lx2-fails/330/2 "2022-05-22T05:31:07Z")
The kernel config is based on the stock arm64 defconfig. This will need to be tweaked to support the iptables, networking, cgroups features required by docker.