# HummingBoard2 iMX6SDL eMMC and SD Card problem

**URL:** <https://community.solid-run.com/t/hummingboard2-imx6sdl-emmc-and-sd-card-problem/286>\
**Category:** I.MX6\
**Tags:** yocto\
**Created:** [March 30, 2022, 10:40am UTC](https://community.solid-run.com/t/hummingboard2-imx6sdl-emmc-and-sd-card-problem/286 "2022-03-30T10:40:16Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![bhstalel](https://avatars.discourse-cdn.com/v4/letter/b/58f4c7/32.png) [@bhstalel](https://community.solid-run.com/u/bhstalel)\
**Post date:** [March 30, 2022, 10:40am UTC](https://community.solid-run.com/t/hummingboard2-imx6sdl-emmc-and-sd-card-problem/286/1 "2022-03-30T10:40:16Z")

</div>

Hello All,

I have a HummingBoard2 iMX6SDL, and it is a SolidSense product with the nordic BLE add-on module.

When I try to boot the board from the SD card it does not boot.

When I install the basic debian image in the SD card, it boots correctly:

[https://solidrun.atlassian.net/wiki/spaces/developer/pages/270631021/HummingBoard+CBi+Quick+Start+Guide#Booting-form-an-SD-card](https://solidrun.atlassian.net/wiki/spaces/developer/pages/270631021/HummingBoard+CBi+Quick+Start+Guide#Booting-form-an-SD-card)

But, when I try to flash the SolidSense images (SolidSense, SolidSense-Azure) it does not want to boot.

I followed this SolidSense Azure wiki: [https://solidrun.atlassian.net/wiki/spaces/developer/pages/265256961/Running+Microsoft+Azure+IoT+Edge+agent+on+SolidSense+systems](https://solidrun.atlassian.net/wiki/spaces/developer/pages/265256961/Running+Microsoft+Azure+IoT+Edge+agent+on+SolidSense+systems)

Also, I tried to build an image using Yocto with the n6g board which is defined in [meta-solidrun-solidsense], then I tried using USB OTG with UUU:

UUU detects the board but it fails to load the image with the error: “Invalid IVT header”.

I want to install the SolidSense Azure image into my HummingBoard2 board, also I want a way to run the Yocto image.

Thanks,  
Talel

---

<div class="post-metadata">

**Author:** ![weedmic](https://avatars.discourse-cdn.com/v4/letter/w/53a042/32.png) [@weedmic](https://community.solid-run.com/u/weedmic)\
**Post date:** [September 18, 2022, 11:38am UTC](https://community.solid-run.com/t/hummingboard2-imx6sdl-emmc-and-sd-card-problem/286/2 "2022-09-18T11:38:51Z")

</div>

> [@bhstalel](#):
>
> hen I install the basic debian image in the SD card, it boots corre

I did not get that far myself, but… did you remove the jumpers to be 12 34 78?