# Hummingboard2 imx6 w/emmc organelle swap

**URL:** <https://community.solid-run.com/t/hummingboard2-imx6-w-emmc-organelle-swap/1161>\
**Category:** I.MX6\
**Created:** [September 18, 2026, 5:56am UTC](https://community.solid-run.com/t/hummingboard2-imx6-w-emmc-organelle-swap/1161 "2026-09-18T05:56:29Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nofunlowlife](https://avatars.discourse-cdn.com/v4/letter/n/8e8cbc/32.png) [@nofunlowlife](https://community.solid-run.com/u/nofunlowlife)\
**Post date:** [September 18, 2026, 5:56am UTC](https://community.solid-run.com/t/hummingboard2-imx6-w-emmc-organelle-swap/1161/1 "2026-09-18T05:56:29Z")

</div>

The organelle uses imx6 and people have had luck swapping them from the cubox i4 quad core and I got a hummingboard2 gate when I put the som into organelle I get nothing at all. I added the .dtb file to the uEnv.txt and the dtbs folder but it’s blank screen and hung up at 99% on the organelle load screen. Is there anything I can do to the som to make it readable by the organelle??