# Humming board pulse gui through HDMI support

**URL:** <https://community.solid-run.com/t/humming-board-pulse-gui-through-hdmi-support/943>\
**Category:** NXP i.MX8M Plus\
**Created:** [December 24, 2024, 6:27am UTC](https://community.solid-run.com/t/humming-board-pulse-gui-through-hdmi-support/943 "2024-12-24T06:27:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Kartheek](https://avatars.discourse-cdn.com/v4/letter/k/b4bc9f/32.png) [@Kartheek](https://community.solid-run.com/u/Kartheek)\
**Post date:** [December 24, 2024, 6:27am UTC](https://community.solid-run.com/t/humming-board-pulse-gui-through-hdmi-support/943/1 "2024-12-24T06:27:49Z")

</div>

Hi Team,

On board HDMI gives only serial console.  
Will HDMI support GUI like rasberry-pi?

Thanks,  
Kartheek

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [December 30, 2024, 11:35am UTC](https://community.solid-run.com/t/humming-board-pulse-gui-through-hdmi-support/943/2 "2024-12-30T11:35:04Z")

</div>

Using the weston/wayland images, or the imx-image-full yocto builds you should get a gui over the HDMI interface. This is not a full desktop, but running weston as the wayland compositor that can run gui applications.