# how to gpıo configuration for imx8mm board

**URL:** <https://community.solid-run.com/t/how-to-gpio-configuration-for-imx8mm-board/869>\
**Category:** NXP i.MX8M Plus\
**Created:** [July 23, 2024, 11:00am UTC](https://community.solid-run.com/t/how-to-gpio-configuration-for-imx8mm-board/869 "2024-07-23T11:00:08Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![nurk](https://avatars.discourse-cdn.com/v4/letter/n/bbe5ce/32.png) [@nurk](https://community.solid-run.com/u/nurk)\
**Post date:** [July 23, 2024, 11:00am UTC](https://community.solid-run.com/t/how-to-gpio-configuration-for-imx8mm-board/869/1 "2024-07-23T11:00:08Z")

</div>

hello.  
i have been trying to develop in embedded linux for a while. i have an imx8mm card. i aim to develop a yocto based project. i am using ubuntu version 20.04. first of all i created an image with the basic settings required for the operating system. then i want to turn on and off a led by configuring the gpio, but i cannot set the gpio configuration. everything is getting very complicated. at this point i need the support of my friends who know. i would be very grateful if you can guide me and help me. thanks