# How can i do smart config for 1MW Murata Wi-Fi module?

**URL:** <https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784>\
**Category:** NXP i.MX8M Plus\
**Tags:** iMX8M-plus\
**Created:** [December 12, 2023, 9:17am UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784 "2023-12-12T09:17:21Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![manoj](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@manoj](https://community.solid-run.com/u/manoj)\
**Post date:** [December 12, 2023, 9:17am UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784/1 "2023-12-12T09:17:21Z")

</div>

Hi,

Could you please let me know the smart configuration procedure for 1MW Murata wi-fi module in access point mode. I am using i.MX 8M NXP controller with SDIO interface with Wi-Fi module.

I have understood that TI developed this provisioning technology for easy connect of STA to the Un-provisioned Wi-Fi AP. Do we have similar technology for above?

Looking forward for your quick response.

Regards  
Manoj

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [December 12, 2023, 2:05pm UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784/2 "2023-12-12T14:05:58Z")

</div>

I was not aware of any of the Cypress based chipsets that support DPP (their implementation of Easy Connect) in SoftAP mode. Infineon does provide their non-upstreamed driver and patchset that does include DPP support in the brcmfmac driver, but I believe that is only in STA mode. If you have pointers to TI’s implementation I will gladly take a look at it.

---

<div class="post-metadata">

**Author:** ![manoj](https://avatars.discourse-cdn.com/v4/letter/m/d9b06d/32.png) [@manoj](https://community.solid-run.com/u/manoj)\
**Post date:** [December 13, 2023, 5:07am UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784/3 "2023-12-13T05:07:11Z")

</div>

Hi,  
I have looked into this smart config provided for ESP32 by TI.

[SmartConfig - ESP32 - — ESP-IDF Programming Guide latest documentation (espressif.com)](https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/network/esp_smartconfig.html#:~:text=The%20SmartConfig%20TM%20is%20a%20provisioning%20technology%20developed,or%20a%20tablet%2C%20to%20an%20un-provisioned%20Wi-Fi%20device.)

Please let me know if any possibility to achieve the smart config in wi-fi module.  
Thanks.

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [December 13, 2023, 8:12am UTC](https://community.solid-run.com/t/how-can-i-do-smart-config-for-1mw-murata-wi-fi-module/784/4 "2023-12-13T08:12:50Z")

</div>

Those patches are only for the device to be registered automatically to a DPP enabled wifi network. The infineon patchset does add support for this in the brcmfmac driver, with accompanying firmware and wpa\_supplicant patches. Neither implement seems to integrate this when the device is working as an AP.