# HoneyComb LX2 no console or GPU output **URL:** https://community.solid-run.com/t/honeycomb-lx2-no-console-or-gpu-output/310 **Category:** NXP LX2160 **Created:** [May 8, 2022, 11:34am UTC](https://community.solid-run.com/t/honeycomb-lx2-no-console-or-gpu-output/310 "2022-05-08T11:34:21Z") **Posts on this page:** 1 **Showing post:** 9
### Author: ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet) #### Post date: [May 11, 2022, 3:19pm UTC](https://community.solid-run.com/t/honeycomb-lx2-no-console-or-gpu-output/310/9 "2022-05-11T15:19:00Z")
I have diagnosed the issue and you can find the solution here. > [@U-Boot (ATF) failure LDSK-21.08 on ClearFog LX2](https://community.solid-run.com/t/u-boot-atf-failure-ldsk-21-08-on-clearfog-lx2/316/7): > > I just did a fresh clone and test build and was unable to replicate the BL2 image bloat you were seeing. However on my test machine I found that this patch was causing my machine to not boot from the usdhc card. Can you try and revert this commit from your build/rcw and test the image again? lx2160acex7: mode 8: use external PLLs If you are still having the bloat issue I can also share my patch that switches to gcc-10 I will work with the team to get new images built by our CI. --- _[View the full topic](https://community.solid-run.com/t/honeycomb-lx2-no-console-or-gpu-output/310)._