# Honeycomb LX2 kernel config/boot params for console output?

**URL:** <https://community.solid-run.com/t/honeycomb-lx2-kernel-config-boot-params-for-console-output/328>\
**Category:** NXP LX2160\
**Created:** [May 17, 2022, 6:29pm UTC](https://community.solid-run.com/t/honeycomb-lx2-kernel-config-boot-params-for-console-output/328 "2022-05-17T18:29:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![the\_n00b](https://avatars.discourse-cdn.com/v4/letter/t/8e8cbc/32.png) [@the\_n00b](https://community.solid-run.com/u/the_n00b)\
**Post date:** [May 17, 2022, 6:29pm UTC](https://community.solid-run.com/t/honeycomb-lx2-kernel-config-boot-params-for-console-output/328/1 "2022-05-17T18:29:09Z")

</div>

I installed Gentoo on my LX2 and get as far as loading the kernel, but then I lose console output. I tried using the same boot parameters as SolidRun’s Ubuntu image, no dice. Thinking it’s probably a kernel config change that needs to happen. Does anyone know which flags need to be set for the LX2 to produce console output?