# Heatsink for clearfog pro

**URL:** <https://community.solid-run.com/t/heatsink-for-clearfog-pro/416>\
**Category:** OCTEON CN9130\
**Created:** [August 3, 2022, 12:48pm UTC](https://community.solid-run.com/t/heatsink-for-clearfog-pro/416 "2022-08-03T12:48:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![doudootiana](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@doudootiana](https://community.solid-run.com/u/doudootiana)\
**Post date:** [August 3, 2022, 12:48pm UTC](https://community.solid-run.com/t/heatsink-for-clearfog-pro/416/1 "2022-08-03T12:48:23Z")

</div>

Hy

I have changer the a388 som of my clearfog pro for a cn9130.  
One question please ^^ : is there a heatsink for the cn9130 som?  
The one i have for the a388 doesn’t match ☹

Thanks by advance

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [August 3, 2022, 1:11pm UTC](https://community.solid-run.com/t/heatsink-for-clearfog-pro/416/2 "2022-08-03T13:11:37Z")

</div>

It is the same heatsink. I have both a388 and CN913x heatsinks and both are identical. If you are seeing gaps you may just need thicker thermal pads.

---

<div class="post-metadata">

**Author:** ![doudootiana](https://avatars.discourse-cdn.com/v4/letter/d/5f8ce5/32.png) [@doudootiana](https://community.solid-run.com/u/doudootiana)\
**Post date:** [August 3, 2022, 5:34pm UTC](https://community.solid-run.com/t/heatsink-for-clearfog-pro/416/3 "2022-08-03T17:34:41Z")

</div>

Hy  
Thanks you for tour answer ^^