# Hailo15h yocto issues

**URL:** <https://community.solid-run.com/t/hailo15h-yocto-issues/941>\
**Category:** Uncategorized\
**Tags:** yocto\
**Created:** [December 19, 2024, 1:29pm UTC](https://community.solid-run.com/t/hailo15h-yocto-issues/941 "2024-12-19T13:29:52Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![koschei](https://avatars.discourse-cdn.com/v4/letter/k/958977/32.png) [@koschei](https://community.solid-run.com/u/koschei)\
**Post date:** [December 19, 2024, 1:29pm UTC](https://community.solid-run.com/t/hailo15h-yocto-issues/941/1 "2024-12-19T13:29:52Z")

</div>

Hi!  
I’m trying to make a custom yocto image, and for some reason the image stops booting after (i think) some size threshold is reached. Eiiter if I add dev packages or set the fixed partition size. Could you help with that?

Could you also explain difference between uboot flashing modes: wic and partition.  
The partition mode seems to sometimes work, but wic mode just says that no partitions are dound after flashing and I have to start from the uboot itb file again.

Also! I wanted to maybe re-flash uboot to make sure it’s up-to-date, but I can’t find the hailo15\_board\_tools package mentioned in the manual anywhere.