# Hailo-15 SOM carrier design **URL:** \ **Category:** Uncategorized\ **Created:** [April 4, 2025, 12:10pm UTC](https://community.solid-run.com/t/hailo-15-som-carrier-design/992 "2025-04-04T12:10:47Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![JiyongHan](https://avatars.discourse-cdn.com/v4/letter/j/eada6e/32.png) [@JiyongHan](https://community.solid-run.com/u/JiyongHan)\ **Post date:** [April 4, 2025, 12:10pm UTC](https://community.solid-run.com/t/hailo-15-som-carrier-design/992/1 "2025-04-04T12:10:48Z")
Hello, we are unedr developing carrier board for Hailo-15 Som. we have carrier board from Solidrun. we think it’s possible to design based on your reference schematic. but we need your guide for HDMI design… We want to design HDMI port on carrier. 1. we must use DSI signal from J5001 BtoB connector on carrier ?? From Hailo’s reference SBC, H15 used DSI signal for HDMI. we want to use Hailo15 reference schematic with Solidrun carrier’s DSI signal. possible? 2. To use HDMI, Solidrun’s latest BSP image have HDMI function ?? Please guide me ASAP. thanks ---
**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\ **Post date:** [April 4, 2025, 12:37pm UTC](https://community.solid-run.com/t/hailo-15-som-carrier-design/992/2 "2025-04-04T12:37:42Z")
yes you must use a DSI to HDMI converter. However with these design specifics we prefer you open a ticket with [support@solid-run.com](mailto:support@solid-run.com). Look forward to working on your project. ---
**Author:** ![JiyongHan](https://avatars.discourse-cdn.com/v4/letter/j/eada6e/32.png) [@JiyongHan](https://community.solid-run.com/u/JiyongHan)\ **Post date:** [April 4, 2025, 12:42pm UTC](https://community.solid-run.com/t/hailo-15-som-carrier-design/992/3 "2025-04-04T12:42:12Z")
thanks for your reply !! ok, we will contact to ‘support@solid-run.com’ to review our schematic with solid-run team.