# Forcing power on for the Lx2 honeycomb

**URL:** <https://community.solid-run.com/t/forcing-power-on-for-the-lx2-honeycomb/233>\
**Category:** NXP LX2160\
**Created:** [February 1, 2022, 9:38pm UTC](https://community.solid-run.com/t/forcing-power-on-for-the-lx2-honeycomb/233 "2022-02-01T21:38:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![embeddedDeveloper](https://avatars.discourse-cdn.com/v4/letter/e/c4cdca/32.png) [@embeddedDeveloper](https://community.solid-run.com/u/embeddedDeveloper)\
**Post date:** [February 1, 2022, 9:38pm UTC](https://community.solid-run.com/t/forcing-power-on-for-the-lx2-honeycomb/233/1 "2022-02-01T21:38:47Z")

</div>

I have a remote controlled power switch so I can remotely power on and off the Lx2 honeycomb. Is there way (ex: jumper) so I don’t need to always press the case power button?

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [February 2, 2022, 7:43am UTC](https://community.solid-run.com/t/forcing-power-on-for-the-lx2-honeycomb/233/2 "2022-02-02T07:43:32Z")

</div>

The header for J39 on the ITX carrier next to the ATX connector can be populated and jumpered. This pulls ATX PS-ON to ground which will force the PSU to power on.

---

<div class="post-metadata">

**Author:** ![AreYouLoco](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/areyouloco/32/303_2.png) [@AreYouLoco](https://community.solid-run.com/u/AreYouLoco)\
**Post date:** [November 16, 2024, 2:17pm UTC](https://community.solid-run.com/t/forcing-power-on-for-the-lx2-honeycomb/233/3 "2024-11-16T14:17:26Z")

</div>

Thanks for that info I just soldered gold-pins and will jumper that most likely when PSU arrives