# Dimensions and specs of Honeycomb lx2160 board

**URL:** <https://community.solid-run.com/t/dimensions-and-specs-of-honeycomb-lx2160-board/308>\
**Category:** NXP LX2160\
**Tags:** NXP-LX2160\
**Created:** [May 6, 2022, 3:16am UTC](https://community.solid-run.com/t/dimensions-and-specs-of-honeycomb-lx2160-board/308 "2022-05-06T03:16:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![asehnert](https://avatars.discourse-cdn.com/v4/letter/a/df705f/32.png) [@asehnert](https://community.solid-run.com/u/asehnert)\
**Post date:** [May 6, 2022, 3:16am UTC](https://community.solid-run.com/t/dimensions-and-specs-of-honeycomb-lx2160-board/308/1 "2022-05-06T03:16:23Z")

</div>

I’m thinking about 3D printing a case for the HoneyComb. Are there board layouts/data sheets available for sizing purposes?

- Thanks

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [May 6, 2022, 4:59am UTC](https://community.solid-run.com/t/dimensions-and-specs-of-honeycomb-lx2160-board/308/2 "2022-05-06T04:59:51Z")

</div>

It is a standard mini-ITX board layout.

---

<div class="post-metadata">

**Author:** ![wick](https://avatars.discourse-cdn.com/v4/letter/w/df788c/32.png) [@wick](https://community.solid-run.com/u/wick)\
**Post date:** [May 6, 2022, 1:37pm UTC](https://community.solid-run.com/t/dimensions-and-specs-of-honeycomb-lx2160-board/308/3 "2022-05-06T13:37:41Z")

</div>

The 3d files are spread across the dev pages for this board: [https://solidrun.atlassian.net/wiki/spaces/developer/pages/197493994/LX2160A+COM+Hardware+User+Manual](https://solidrun.atlassian.net/wiki/spaces/developer/pages/197493994/LX2160A+COM+Hardware+User+Manual)