# COM Mechanical Footprint

**URL:** <https://community.solid-run.com/t/com-mechanical-footprint/450>\
**Category:** NXP LX2160\
**Created:** [August 30, 2022, 10:54am UTC](https://community.solid-run.com/t/com-mechanical-footprint/450 "2022-08-30T10:54:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![womble](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/womble/32/114_2.png) [@womble](https://community.solid-run.com/u/womble)\
**Post date:** [August 30, 2022, 10:54am UTC](https://community.solid-run.com/t/com-mechanical-footprint/450/1 "2022-08-30T10:54:04Z")

</div>

Hello,

We’re designing a custom carreir board for the LX2160A COM and I’m looking for a mechanical drawing of the footprint including the connector locations. There is some mechanical design information including the mounting hole locations and a STEP on the user manual Wiki but I can’t find a drawing of the connector locations. Is a COM footprint drawing available?

Thanks

---

<div class="post-metadata">

**Author:** ![jnettlet](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/jnettlet/32/62_2.png) [@jnettlet](https://community.solid-run.com/u/jnettlet)\
**Post date:** [August 30, 2022, 11:50am UTC](https://community.solid-run.com/t/com-mechanical-footprint/450/2 "2022-08-30T11:50:05Z")

</div>

You can reference the carrier board documentation here, [https://solidrun.atlassian.net/wiki/spaces/developer/pages/197494288/HoneyComb+LX2+ClearFog+CX+LX2+Quick+Start+Guide#Documentation](https://solidrun.atlassian.net/wiki/spaces/developer/pages/197494288/HoneyComb+LX2+ClearFog+CX+LX2+Quick+Start+Guide#Documentation)

Beyond that the CEX7 module is to the COM Express Type 7 standard so that can also be referenced.

---

<div class="post-metadata">

**Author:** ![womble](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/womble/32/114_2.png) [@womble](https://community.solid-run.com/u/womble)\
**Post date:** [September 2, 2022, 11:06am UTC](https://community.solid-run.com/t/com-mechanical-footprint/450/3 "2022-09-02T11:06:40Z")

</div>

Thanks.

For anyone else with the same question - the PCB design project in the link below can be opened in Altium and measured to get the relative positions of the connector footprints and mounting hardware. The footprint information seems to be in the paid section of the CEX7 standard (it isn’t included in the free carrier board design guide)

[https://solidrun.atlassian.net/wiki/download/attachments/197494288/ClearFog-CX-and-HoneyComb-Schematics-and-Layout-4977.zip?api=v2](https://solidrun.atlassian.net/wiki/download/attachments/197494288/ClearFog-CX-and-HoneyComb-Schematics-and-Layout-4977.zip?api=v2)