# ClearFog LX2162A Kit ClearFog not booting

**URL:** <https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105>\
**Category:** NXP LX2160\
**Created:** [February 21, 2026, 3:17pm UTC](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105 "2026-02-21T15:17:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![moehme](https://avatars.discourse-cdn.com/v4/letter/m/cab0a1/32.png) [@moehme](https://community.solid-run.com/u/moehme)\
**Post date:** [February 21, 2026, 3:17pm UTC](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105/1 "2026-02-21T15:17:46Z")

</div>

Hello @ all,

is there a way to do some kind of hardware reset. The led which seems to show she the status isn´t shinning. I changes the dip switches for booting from sd-card. There is also no output on the serial terminal.

thanks for your help.

BR

Matthias

---

<div class="post-metadata">

**Author:** ![PacMan](https://avatars.discourse-cdn.com/v4/letter/p/439d5e/32.png) [@PacMan](https://community.solid-run.com/u/PacMan)\
**Post date:** [September 7, 2026, 2:17pm UTC](https://community.solid-run.com/t/clearfog-lx2162a-kit-clearfog-not-booting/1105/2 "2026-09-07T14:17:33Z")

</div>

1: Is the switch on your power-supply switched on ? (I know, stupid question, but it happens for everyone).

2: Does the CPU-cooler fan spin up ?

3: If not, try with a different PSU, it may be that the board is not getting any power at all..