# ClearFog ITX + LX2160A-CEX7 rev2.1 : nothing on console

**URL:** <https://community.solid-run.com/t/clearfog-itx-lx2160a-cex7-rev2-1-nothing-on-console/1083>\
**Category:** Uncategorized\
**Created:** [December 2, 2025, 4:56pm UTC](https://community.solid-run.com/t/clearfog-itx-lx2160a-cex7-rev2-1-nothing-on-console/1083 "2025-12-02T16:56:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nfl](https://avatars.discourse-cdn.com/v4/letter/n/b2d939/32.png) [@nfl](https://community.solid-run.com/u/nfl)\
**Post date:** [December 2, 2025, 4:56pm UTC](https://community.solid-run.com/t/clearfog-itx-lx2160a-cex7-rev2-1-nothing-on-console/1083/1 "2025-12-02T16:56:15Z")

</div>

Hello,

I tried my 2 fresh HoneyComb LX2 and they are totaly silent on console…

the FTDI chip is seen on my computer (/dev/ttyUSB0), connected to the serial via picocom 8N1 115200 and … nothing, no bootloader message…

Tried with and without a sdcard, with emmc boot strap, etc…

Did I miss something ?

---

<div class="post-metadata">

**Author:** ![nfl](https://avatars.discourse-cdn.com/v4/letter/n/b2d939/32.png) [@nfl](https://community.solid-run.com/u/nfl)\
**Post date:** [December 11, 2025, 3:15pm UTC](https://community.solid-run.com/t/clearfog-itx-lx2160a-cex7-rev2-1-nothing-on-console/1083/2 "2025-12-11T15:15:49Z")

</div>

SDCard was not working with Honeycomb (Kingston Endurance 32G) changed to a Sandisk 16G =\> Working…