# ClearFog CX LX2 - What does « sensors » measure?

**URL:** <https://community.solid-run.com/t/clearfog-cx-lx2-what-does-sensors-measure/1166>\
**Category:** NXP LX2160\
**Created:** [October 18, 2026, 10:24am UTC](https://community.solid-run.com/t/clearfog-cx-lx2-what-does-sensors-measure/1166 "2026-10-18T10:24:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![fdekeers](https://dub1.discourse-cdn.com/flex005/user_avatar/community.solid-run.com/fdekeers/32/444_2.png) [@fdekeers](https://community.solid-run.com/u/fdekeers)\
**Post date:** [October 18, 2026, 10:24am UTC](https://community.solid-run.com/t/clearfog-cx-lx2-what-does-sensors-measure/1166/1 "2026-10-18T10:24:49Z")

</div>

Hello,

I want to measure the power consumption of my ClearFog CX LX2, using the « sensors » command.

According to post [Sensors terminal output](https://community.solid-run.com/t/sensors-terminal-output/119) , pout1 and pout2 actually measure the same power, but the reference is different.

My question is about what components are actually measured. From my understanding, pout1 is output-side power (Vout x Iout of the converter), excluding the converter’s conversion loss and the 12 V input path, and that it does not include DDR, SerDes, I/O, the module peripherals (PHY, USB hub, eMMC, SPI flash, clocks) or the carrier. Do you confirm ?

Thanks in advance.